Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Brooklyn?
Gate parts and welding in Brooklyn typically run between $165 and $1,450, with most homeowners paying $280 to $520 for common repairs like hinge replacement, latch fixes, and small weld jobs. A full wrought-iron gate restoration with custom fabrication and on-site welding can reach $2,800 to $4,800, especially on landmark brownstones in Park Slope or Brooklyn Heights where ironwork is ornate. You’ll get the exact number in writing before any work starts, so there’s no guessing when the invoice arrives.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what Brooklyn homeowners are paying this year for the most common gate parts and welding work. These ranges reflect what we see across Carroll Gardens, Williamsburg, Bay Ridge, Flatbush, and Ditmas Park.
| Repair or Replacement | Parts Cost | Labor (incl. welding time) | Typical Total Range |
|---|---|---|---|
| Gate latch replacement (standard) | $18 – $55 | $95 – $140 | $115 – $195 |
| Gate hinge replacement (pair) | $30 – $90 | $120 – $185 | $150 – $275 |
| Weld crack repair (single crack) | $8 – $20 (rod/wire) | $130 – $200 | $140 – $220 |
| Wrought-iron picket replacement | $25 – $70 per picket | $90 – $150 | $115 – $220 per picket |
| Gate straightening (bent frame) | $0 – $15 | $180 – $300 | $180 – $315 |
| Custom gate fabrication (basic) | $400 – $900 | $600 – $1,200 | $1,000 – $2,100 |
| Full wrought-iron restoration | $800 – $2,200 | $1,500 – $2,600 | $2,300 – $4,800 |
| Welded security bar addition | $40 – $120 | $150 – $260 | $190 – $380 |
| Gate post reset (in concrete) | $15 – $45 | $250 – $420 | $265 – $465 |
Welding costs in Brooklyn include setup time, which is why even a small crack repair rarely drops below $140. A technician has to bring the welder, prep the surface, mask off nearby areas, and grind the weld smooth. That’s not a five-minute job even when the weld itself is small.
Key Takeaways
- Most Brooklyn gate welding and parts jobs land between $280 and $520.
- Small latch or hinge fixes start around $115.
- Custom fabrication and full restorations run $1,000 to $4,800 depending on the ironwork.
- Wrought iron is more common in landmark districts, which often means ornamental work that costs more to repair.
- Every visit starts with a written price, so you approve the number before tools come out.
If the gate is attached to a brownstone or a landmarked building, expect to pay on the higher end of these ranges. Ornamental ironwork on historic properties in Brooklyn Heights and Fort Greene often requires matching existing patterns, which means custom fabrication rather than off-the-shelf parts.
What Affects Gate Parts & Welding Pricing in Brooklyn
- Gate material. Wrought iron and steel gates weld cleanly but cost more in labor because the work is heavier and slower. Aluminum gates are lighter but require specialized welding rods, which adds $20 to $40 to materials. Wood gates rarely need welding, but the metal hardware on them does.
- Access to the gate. A gate at the front of a brownstone with a clear stoop is straightforward. A rear-yard gate down a narrow alley or behind a garden in Park Slope takes longer to reach, and that time shows up in the labor line.
- Rust and corrosion. Brooklyn’s salt air near Red Hook and the waterfront accelerates rust on iron gates. A hinge that’s rusted through takes longer to cut off and replace than one that’s simply worn, and heavy corrosion often means the post needs attention too.
- Landmark requirements. If you’re in a historic district, the Landmarks Preservation Commission may require like-for-like replacement of ornamental ironwork. Custom cast pieces cost $80 to $250 each depending on the pattern, and that’s before labor.
- Whether the gate is sagging. A gate that’s dragged on the sidewalk has usually pulled its post out of plumb. Re-welding the hinge without fixing the post means you’ll be back in six months. A proper post reset adds $265 to $465 but it’s the difference between a fix and a patch.
- Weather at the time of the job. Winter welding in Brooklyn means working with a propane torch to preheat the metal so the weld doesn’t crack. January and February jobs sometimes carry a cold-weather surcharge of $30 to $60. We’ll tell you if that applies to your job before we start.
Common Gate Welding Repairs in Brooklyn
Here are the repairs we handle most often, and what they cost in this market. Every one of these starts with a written price, so you know the number before we touch the gate.
Cracked Weld Repair
When a weld joint cracks, usually at the hinge plate or where a picket meets the top rail, the fix is to grind out the old weld, prep the metal, and lay a new bead. Most single-crack repairs run $140 to $220. If the crack has been there a while and moisture got in, there may be internal rust that makes the job $50 to $80 more.
Broken Hinge Replacement
Hinges are the most common failure on Brooklyn gates because they carry the full weight of the door through thousands of open-and-close cycles. A pair of new hinges with labor runs $150 to $275. When a hinge breaks, the gate usually sags and scrapes, so we check the post and latch while we’re there rather than leaving you with two repairs instead of one.
Bent Gate Frame Straightening
Cars bump gates, kids swing on them, snow shoveling pushes them past their range. A bent frame can often be straightened with heat and careful pressure, which runs $180 to $315. This is skilled work. Heating steel unevenly can warp the gate worse than it was before, so this is never a job to hand off to someone without welding experience.
Wrought-Iron Picket Replacement
When a picket breaks or rusts through at the base, we cut it out and weld in a new one that matches the existing pattern. Each picket runs $115 to $220 including labor. On older Brooklyn homes with ornate scrollwork, the replacement picket sometimes needs to be custom-formed to match, which pushes the top end of that range.
Gate Post Reset
A leaning post is often the root cause of every other gate problem: sagging, latch misalignment, and hinge stress. Resetting a post in a new concrete footing runs $265 to $465 depending on depth and whether we need to break out the old concrete. In Brooklyn yards where the soil is sandy, posts need a deeper footing than they do in other parts of the city, and we account for that in the quote.
How Welding Safety Is Handled On Your Property
Welding involves open flame or electrical arc, bright light, and heat. On a Brooklyn stoop or in a garden where kids, pets, and landscaping are nearby, that demands care. Our technicians use welding blankets to shield adjacent surfaces, work only after clearing the immediate area, and never leave a hot weld unattended. If there’s a gas line nearby, we verify its location before striking an arc. A homeowner should never attempt gate welding as a DIY project. The combination of electrical current, 6,000-degree heat, and load-bearing steel is genuinely dangerous. This is work for a trained professional with the right equipment and insurance.
How to Save on Gate Parts & Welding
- Fix small problems before they bend something bigger. A worn latch that costs $115 to replace now can cause the gate to slam and crack a hinge, which becomes a $275 job. The cheapest repair is the one you do early.
- Bundle repairs. If the gate needs a new hinge and the latch is sticky and a small crack is forming, doing all three in one visit costs less than three separate trips because the technician is already on site with the welder set up. Expect to save $60 to $120 compared to scheduling them individually.
- Ask about off-season timing. Winter is slower for gate work across Brooklyn. Scheduling a non-urgent repair in February can sometimes land you at the lower end of the labor range, and it gets your gate ready for spring when you’ll actually use it.
- Keep the gate lubricated and the hinges clean. Basic maintenance doesn’t require welding. A $10 can of lubricant and a wipedown every few months extends hinge life by years. This is the cheapest gate repair: the one that never becomes necessary.
- Get a written estimate. Our price is in writing before any work begins, and it’s free. Call (934) 649-3673 and you’ll know the number before we even schedule the visit. Comparing written quotes is the fastest way to know you’re paying Brooklyn market rate.
How Our Gate Parts & Welding Process Works
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Here’s the step-by-step of what happens when you call us for gate parts or welding in Brooklyn.
- You call (934) 649-3673. A live person answers, even at 2 a.m. No voicemail. You describe the problem, and we schedule a visit at a time that works for your household.
- We arrive and look before we touch. A background-checked, uniformed technician shows up and assesses the gate, the post, the hinges, the latch, and the surrounding area. We ask before we move anything, and we explain what we’re seeing in plain language.
- You get a written price. Before any tool comes off the truck, you see the full number in writing. No vague estimates. No “we’ll see how it goes.” If you want to think about it, the price still stands, and there’s no charge for the visit.
- We protect your home while we work. If we need to step inside, shoe covers go on and drop cloths go down. Floors stay clean. If there’s a dog, we ask where they are before we move between the front and back yards.
- The weld happens on site. We bring the welder, the generator if needed, and the right rod for your gate’s metal. The work happens at your gate, not in a shop, so you can watch from the stoop if you want to see the process.
- Cleanup is documented. Before we leave, we take a photo of the clean work area and show it to you. It’s part of how we work, not an add-on. The C.A.R.E. values we follow are specific: Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work.
- The 365-Day Done Right Promise applies. If the repair isn’t done right, we make it right. No argument, no fine print. That’s the whole promise.
Gate Parts & Welding Cost By Brooklyn Neighborhood
Prices don’t vary wildly by neighborhood, but there are patterns. Houses in Park Slope and Brooklyn Heights often have older ornamental iron that requires custom fabrication, so total project costs skew higher. Homes in Bensonhurst and Sheepshead Bay tend toward simpler steel gates and driveway gates, where parts are more standard and labor moves faster. Red Hook and DUMBO near the waterfront see more rust and corrosion from salt air, which means more grinding and surface prep before welding. Bushwick and Bed-Stuy have a mix of old iron and newer steel work, and the cost usually follows which one you have.
When Welding Is The Better Option vs. Replacement
This question comes up often, and the answer is usually a cost decision. If the gate’s frame is solid and the damage is a cracked weld, a broken picket, or a failed hinge, repair is almost always cheaper than replacement. A $180 weld repair beats a $1,800 new gate. But if rust has eaten through multiple pickets or the frame is bowed beyond straightening, replacement becomes the honest answer. We’ll tell you when repair is throwing good money after bad. That conversation is part of a free estimate, and you’ll see the numbers for both options in writing before you decide.
Our Work on the Brands Brooklyn Homes Have
Most gates in Brooklyn fall into two camps: original wrought iron from early 20th century construction, and manufactured gates added later. Our technicians are factory-trained on the gate brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The right fix happens on the first visit because we know these systems from the inside out. We also weld and fabricate gate parts in Brooklyn for older ironwork that has no brand name at all.
If you’re looking at the rest of what we do, our home page covers gate repair, gate installation, and electric gate repair in Brooklyn in one place.
FAQs – Gate Parts & Welding Cost
How much does it cost to weld a gate in Brooklyn?
Welding a gate in Brooklyn runs $140 to $220 for a single crack repair, and $180 to $315 for straightening a bent frame. Larger jobs like replacing multiple pickets or resetting a post range from $265 to $465. The exact number depends on the type of metal, the extent of rust, and how accessible the gate is. Call (934) 649-3673 for a free written estimate.
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper. A hinge replacement runs $150 to $275, and a full restororation of an existing wrought-iron gate runs $2,300 to $4,800. A brand new custom gate runs $1,000 to $2,100 for basic fabrication and $4,000 to $8,000 for ornamental ironwork comparable to older Brooklyn originals. If the frame is solid, repair wins on cost. We’ll show you both numbers in writing.
How much does a gate latch replacement cost in Brooklyn?
A standard gate latch replacement runs $115 to $195 total, including parts and labor. Heavy-duty latches for driveway gates or security gates run $160 to $240. The latch itself is $18 to $55, and the rest is labor, which includes adjusting the alignment so the gate actually closes and stays closed.
Can you weld a wrought iron gate without removing it?
Yes. Most welding repair on wrought iron gates in Brooklyn is done on site, with the gate still mounted. We bring the welder, welding blankets, and the right rod for the metal, and the work happens right at the gate. On-site welding actually costs less because there’s no removal and reinstallation labor. The exception is full restoration work where the gate needs sandblasting and repainting, which is done in a shop.
How long does gate welding take?
A single crack repair takes 45 to 90 minutes. Hinge replacement with two new hinges takes 1 to 2 hours. A full post reset with new concrete takes 3 to 5 hours and needs a day for the concrete to cure before the gate goes back on. We’ll give you a time window when we provide the written estimate.
Do you work on electric gates too?
Yes. Electric gate repair is one of our three core services, and we’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If the problem is the opener, the motor, or the circuit board, we handle it. If the problem is the metal and the weld, that’s our other specialty. Either way, call (934) 649-3673 and a live person answers.
Get A Free Brooklyn Gate Parts & Welding Estimate
If your gate is sagging, cracked, rusted through, or just won’t latch, call us. You’ll speak to a live person, not a voicemail. We’ll ask what’s happening with the gate, schedule a visit that fits your day, and put a written price in your hand before any work begins. That’s how it works on every single job. Call (934) 649-3673 for your free estimate.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Brooklyn since 2009.
Pricing reflects the Brooklyn market as of 2026. Latch and Post Gate Repair Brooklyn offers free estimates – call (934) 649-3673.
What Our Customers Say
"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Careful and considerate from start to finish. Our kids were playing in the yard and the crew was mindful of them the whole time. Gate opens like new and the area was spotless after."
- Marcus Teague