Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Brooklyn Homeowners
We install gates that hold up to Brooklyn’s winters, salt air near the waterfront, and the daily rhythm of kids, strollers, and dogs moving through. Latch and Post Gate Repair Brooklyn has been part of the Cedarwell family since 2009, and our team installs driveway gates, sidewalk gates, and automated systems for homes from Greenpoint to Flatbush. When you call (934) 649-3673, a live person answers – no voicemail tree, no callback queue. We’ll schedule a visit, put the price in writing before any work starts, and back the installation with our 365-Day Done Right Promise.
Every gate comes down to two parts – the latch that holds it and the post that carries it. That’s the job we focus on. And because we’re factory-trained on LiftMaster, FAAC, BFT, and Mighty Mule equipment, the work gets done right on the first visit, not the third.
Automatic Gate Installation
Automatic Gate Installation means adding a motorized opener and access system to a gate so it opens with a remote, keypad, or phone app instead of by hand. Without one, someone has to get out of the car in the rain, wrestle a heavy gate open, and close it again. That’s the exact inconvenience our Brooklyn customers want gone. We install automatic openers on new gates and retrofit them onto existing ones, with prices that start around $1,800 for a single swing arm and run $3,200 to $6,500 for a full system with keypad entry. You’ll see the exact number in writing before we touch anything.
Retrofit openers on existing gates
If your gate is solid but you’re tired of walking out to open it, a retrofit is often the smartest spend. We mount the operator, route the wiring, and sync your remotes in one visit, and most retrofits run $1,800 to $3,800 depending on gate weight and power access.
New automatic gate packages
A new automatic gate means the gate, posts, opener, and access controls all go in together. We quote these as a single written price, and most Brooklyn installations land between $4,500 and $8,000, including the opener and two remotes.
Styles & brands we work with
Gate Installation Services
Gate Installation Services covers the full job: measuring the opening, setting posts in concrete, hanging the gate, and making sure it swings or slides without sagging a month later. We do this for wood, steel, aluminum, and vinyl gates. A standard Driveway Gate installation in Brooklyn runs $2,400 to $5,500, and a heavier custom steel gate with automation runs higher. Every installation starts with a free on-site measure and a written price before any work begins.
Driveway and side-yard gates
These are the gates that keep a car secure and give kids a defined boundary in the yard. We check the slope of the driveway, the frost line depth for post setting, and the clearance needed for your car’s swing path before we ever dig a hole.
Pedestrian and garden gates
Smaller gates can be just as finicky as large ones, especially when the ground has settled or the existing post has shifted. We install self-closing hinges on garden gates and make sure a Pedestrian Gate in Bedford-Stuyvesant doesn’t bind against the concrete when the temperature drops.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation is a broader term for any gate that runs on power, not just a swing arm opener. It includes the opener itself, plus the safety sensors, wiring, keypad, and sometimes an intercom or vehicle sensor. This is where you want a specialist. Improperly installed electric gates can pinch, stall, or fail when the power drops. A basic electric gate package starts around $3,200, and a full installation with safety edges and a phone app runs $5,000 to $9,000 in Brooklyn. We quote the exact price up front, in writing.
Safety edges and photo sensors
Every electric gate we install includes safety edges or photo eyes that stop the gate if a child, pet, or car is in the path. These aren’t add-ons we mention later. They’re part of the system and part of the written quote.
Power sources and battery backup
Brooklyn has buried lines, overhead lines, and the occasional outage. We’ll run a dedicated circuit to the gate and install a battery backup if you want the gate to keep working when the power goes, so you’re never locked out of your own driveway.
Driveway Gate Installation
Driveway Gate Installation means putting a full-width gate across the vehicle entrance to your property. In Brooklyn, that often means a tight opening with a sidewalk, a curb cut, and a shared lot line, which is why we never use a one-size-fits-all template. Most driveway gate installations run $3,000 to $6,500 for a single-swing steel or aluminum gate, and $6,000 to $12,000 for a double-swing or sliding driveway gate with automation. Every quote includes post concrete, hinge hardware, and cleanup before we leave.
Single-swing driveway gates
This is the most common style we install in neighborhoods like Canarsie and Howard Beach, where the driveway opening is 10 to 14 feet. The gate hinges from one post and opens inward or outward depending on your slope and sidewalk rules.
Double-swing driveway gates
For wider openings, two gate leaves meet in the middle. We set both posts the same day and align the leaves so they close flush every time, even if the ground settles slightly over the first winter.
Sliding Gate Installation
Sliding Gate Installation is the right choice for driveways that slope sharply or properties where swinging a gate would block the sidewalk or a steep hill. The gate rolls along a track or, in cantilever designs, floats above the ground on rollers. Sliding gates work well on short driveways in Bushwick and Astoria where every foot of swing space counts. A typical sliding gate installation in Brooklyn starts around $4,200 and runs $6,500 to $11,000 for an automated system. We’ll walk the site with you and explain which rolling design fits your grade.
Track-based sliding gates
These run on a steel track laid across the driveway, which makes them stable and quieter than you’d expect. We check the concrete depth and drainage before choosing the track, because standing water in a Brooklyn puddle season will shorten the life of the rollers.
Cantilever sliding gates
A cantilever gate rides above the ground on rollers mounted to the gate itself, with no track to trip over or clog with ice. This style is more common on industrial lots, but we’ve installed them on wide residential driveways in Maspeth where smooth operation matters year-round.
Gate Opener Installation
Gate Opener Installation is the motor and control side of an automated gate. Some customers already have a gate they like and just want an opener added. Others want a new opener because the old one’s control board burned out or a storm surge took it. A single opener installation with remote controls typically costs $1,600 to $3,000 in Brooklyn, and a full opener plus keypad and vehicle exit sensor runs $2,500 to $4,500. The written price covers the opener, wiring, and programming.
Adding a keypad and remotes
We program every remote on site and walk you through setting a temporary keypad code before we leave. You’ll know how to add a code, change a code, and delete a lost remote, without having to call us back for a tutorial.
Replacing an old control board
Sometimes the opener’s motor is fine and the board is the problem. We’ll diagnose that before quoting, so you’re not paying for a full opener when a board replacement would do. We carry FAAC and LiftMaster boards on the truck.
Gate Fabrication
Gate Fabrication is the process of building a gate to your exact measurements instead of ordering something pre-made. That matters in Brooklyn, where gate openings are rarely standard and the mix of old brownstones, new construction, and narrow walkways means an off-the-shelf gate often doesn’t fit. We fabricate steel and aluminum gates in custom widths and heights, and can match a style that fits your home’s brickwork or iron railing. Custom fabrication starts around $3,500 for a simple steel pedestrian gate and runs $6,000 to $14,000 or more for an ornamental driveway gate depending on size, material, and design.
Custom steel gates
Steel gives you a sturdier gate and a longer life, especially in Brooklyn’s freeze-thaw cycle. We prime and powder-coat steel gates before installation so they don’t rust at the weld points within two seasons.
Aluminum gates for coastal air
If you’re within a few blocks of the water in Howard Beach, aluminum resists the salt air better than bare steel. It’s lighter, easier on the opener motor, and won’t rust, though it can cost about 15 to 20 percent more than a comparable steel gate.
Brands We Service
Our technicians are factory-trained on LiftMaster, FAAC, BFT, and Mighty Mule, the brands Brooklyn homeowners actually have on their gates. LiftMaster openers are the ones we install most often on residential driveways, and we keep their remotes, keypads, and safety sensors stocked on the truck. If your LiftMaster opener chatters or refuses to fully close, we can usually diagnose it in one visit.
FAAC and BFT show up more on heavier gates and commercial-style systems, and both brands require careful torque and limit setting during installation. We service and install FAAC swing arms, BFT sliding operators, and Mighty Mule openers for lighter driveway gates and farm-style gates. Whether you have a Mighty Mule MM371W or a LiftMaster LA400, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate sags and scrapes the driveway. A gate that scrapes means a hinge or post is failing. It won’t fix itself, and the scraping wears out the bottom edge while stressing the opener motor. On a Brooklyn winter morning, that scrape turns into a stuck gate.
- The opener runs but the gate barely moves. That’s usually a capacitor, a gear, or a limit switch problem, not a cheap remote fix. Running the opener like this burns out the motor. A technician can pinpoint it in one visit.
- You hear a grinding sound when the gate opens. Grinding is metal on metal. It means the chain, gear, or roller needs attention before something snaps. The longer it runs, the more expensive the repair gets.
- The gate stops halfway and reverses. This is usually the safety sensor or the force setting, and it’s a real safety problem, not a nuisance. A gate that reverses unpredictably can close on a child or a pet.
- The post is leaning or the concrete is cracked around it. A leaning post means the foundation is failing. Re-hanging the gate won’t help – the post has to be re-set or replaced. We see this often in older Brooklyn homes where the original post was set in shallow concrete.
Our Process, Step by Step
- 1
Call and talk to a live person. When you call (934) 649-3673, someone answers. We’ll ask about your gate, your opening width, and whether it’s manual or motorized, then schedule a visit that works with your day.
- 2
On-site measure and inspection. We measure the opening, check the ground grade, look at the existing posts, and test the power source if you’re adding an opener. We’ll also check what the gate will swing over or slide past so there are no clearance surprises.
- 3
Written price before any work starts. You’ll get a written quote that includes the gate, posts, hardware, opener if applicable, and cleanup. No pressure, no vague allowances. The number you see is the number you pay.
- 4
The installation, done carefully. We put on shoe covers before we step inside, lay drop cloths on the floor, and keep tools quiet if kids are asleep. Posts go into concrete at the right depth, and the gate is leveled and load-tested before we call it done.
- 5
Cleanup photo and walkthrough. Before we leave, we take a photo of the clean-up and show you how the gate and opener work. Every installation is covered by our 365-Day Done Right Promise – if something isn’t right, we make it right.
How Much Does Gate Installation Cost in Brooklyn?
A typical Gate Installation - Brooklyn runs $2,400 to $6,500 for the gate, posts, and hardware depending on material, width, and whether you’re adding automation. Add an automatic opener and the job usually lands between $4,000 and $9,000. Custom steel or aluminum fabrication starts around $3,500 for a simple pedestrian gate and climbs based on ornamentation and finish. Sliding gates run higher, a fact of the track, the motor, and the extra engineering.
What moves the Gate Installation pricing: gate width and weight, whether the old posts can be reused or need to be replaced, the distance from the nearest power source for an opener, and the material you choose. Wood is cheaper upfront but needs more maintenance. Aluminum is near-zero maintenance and lighter on the opener, but costs more. Steel splits the difference and lasts longest when powder-coated properly.
The way to avoid overpaying is to get a written line-item quote that separates the gate from the opener and the posts. If a quote feels high, ask whether the post concrete is actually thick enough for Brooklyn’s frost line. Shallow footings are a cheap shortcut we won’t take. Our free estimate includes the full measurement, a walkthrough of material options, and a write-up of what each part costs.
Our Service Area Near Brooklyn
We install gates throughout Brooklyn, including Gate Installation in Brooklyn, plus Canarsie, Maspeth, Bushwick, Flatbush, Bedford-Stuyvesant, Greenpoint, and Howard Beach. We also work across the bridge in Gate Installation in New York and Manhattan’s Gate Installation in Financial District. Most Brooklyn installations are scheduled within a week of your call, and we’ll give you a specific arrival window the day before.
Serving Brooklyn, NY - Our Local Coverage Area
We’re based in the Brooklyn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Brooklyn
Gate installation is the process of measuring a driveway or walkway opening, setting posts in concrete, hanging a gate, and adding automation and safety features if needed. In Brooklyn, a proper installation accounts for the sidewalk, the slope of the driveway, and the age of the surrounding masonry. Our team handles the full job, from post footing to final cleanup.
A standard single-swing gate installation takes one day for the gate and posts, with automation added the same day or the next morning. Custom fabricated gates take one to three weeks to build, depending on the design and powder-coat finish. We’ll give you a timeline in writing when we quote the job. Call (934) 649-3673 for a specific schedule.
A standard manual gate installation runs $2,400 to $5,500, and an automated driveway gate runs $4,000 to $9,000 fully installed. Custom fabrication adds time and cost, starting around $3,500. Every quote is written and agreed before we start work. Call (934) 649-3673 for an exact quote – estimates are free.
Yes. We’re factory-trained on LiftMaster openers and stock their remotes, keypads, safety sensors, and control boards on the truck. We also service FAAC, BFT, and Mighty Mule units. If your opener isn’t on that list, call us anyway – we’ll tell you honestly whether we can help.
A live person answers our phone 24 hours a day, 7 days a week, including nights, weekends, and holidays. If your gate is stuck open or won’t close, call (934) 649-3673 and we’ll get someone out to you. Our 365-Day Done Right Promise covers every installation and repair.
Every gate installation is covered by our 365-Day Done Right Promise. If the installation isn’t right, we make it right – no argument, no fine print. Manufacturer warranties on openers and hardware also apply, and we’ll walk you through what’s covered before you sign anything.
Clear the area around the gate and move any cars out of the driveway before we arrive. If we need to run power, clear a path to the electrical panel. We bring shoe covers and drop cloths, and we’ll ask before we move or touch anything inside your home. Tell us if kids are napping and we’ll keep tools quiet.
Schedule Your Gate Installation Service in Brooklyn Today
Ready for a gate that swings true and opens without a fight? Call (934) 649-3673 today for a free, no-obligation estimate. A live person answers around the clock, and you’ll get a written price before any work starts. We’ll show up in uniform, protect your floors, and leave with a cleanup photo – then back the whole job with our 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Brooklyn since 2009.