Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Brooklyn Homeowners
A gate that drags across the sidewalk, a latch that won’t catch, a post that’s leaning after one too many nor’easters. These are the calls we take every week in Brooklyn, and they’re usually fixable the same day. Gate Repair in Brooklyn starts with a straight answer: what’s wrong, what it costs, and whether it’s worth fixing or replacing. Latch and Post Gate Repair Brooklyn has been doing this since 2009, answering every call with a live person, day or night. When your gate won’t close in Greenpoint or Flatbush, that’s the person you want on the other end of the line: (934) 649-3673.
We focus on one thing: gates. Not fences, not decks, not general contracting. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why our technicians arrive with the right parts, the right tools, and a written price before they touch anything.
Driveway Gate Repair
Driveway Gate Repair is about getting your entrance working again without tearing up what you already have. In Brooklyn, driveway gates take abuse that suburban gates never see: road salt, snow plow wake, delivery trucks clipping the edge, and kids climbing over to retrieve a ball from the neighbor’s yard. We fix bent tracks, replace worn rollers, rehang sagging gates, and provide Automatic Gate Repair for the operators that power them. Most driveway gate repairs in Brooklyn run between $195 and $590 depending on whether we’re replacing a roller assembly or rebuilding an entire post. You’ll see the exact number in writing before we start.
Track and Roller Work
A gate that shudders or stops halfway usually has a roller problem. Salt and grit grind the bearings down until the gate rides on metal against metal, which makes it harder to move every week. We replace rollers on LiftMaster, FAAC, and BFT systems regularly, and we stock the common sizes on the truck.
Operator and Motor Service
When the motor runs but the gate doesn’t move, the issue is often a coupling or a limit switch, not the motor itself. We diagnose before we recommend, and we don’t sell you a new operator when a $40 part would solve it. That’s the difference between a gate specialist and a general contractor.
Styles & brands we work with
Gate Welding
Gate Welding is what turns a broken hinge bracket or a rusted-through rail into a gate that holds for another decade. Brooklyn’s humidity and salt air are brutal on steel, especially in neighborhoods near the water like Howard Beach and Sheepshead Bay. We weld gate frames, repair cracked hinges, rebuild rusted bottom rails, and reinforce posts. Most gate welding jobs in Brooklyn range from $250 to $700 depending on the extent of the repair and the thickness of the material. Every weld is ground smooth, primed, and painted to match, so the repair doesn’t look like a patch.
Hinge Rebuilds
A gate that leans or rubs often has a hinge that’s torn loose from the post. Just re-tightening the bolts won’t last; the metal has to be rebuilt. We provide Hinge & Post Repair by welding the mounting plate back to the post or fabricating a new one, then rehang the gate so it swings level.
Bottom Rail and Frame Repair
Water pools at the bottom rail of iron and steel gates, and that’s where the first rust-through appears. We cut out the rotted section, weld in new stock of the same gauge, and seal it so water doesn’t sit there again.
Commercial Gate Repair
Commercial Gate Repair in Brooklyn means parking garages, condo access gates, loading docks, and private roads where a broken gate isn’t just an inconvenience, it’s a problem that stops business. We service sliding and swing gates on BFT, DoorKing, and Viking operators, plus the safety loops and photo eyes that keep them code-compliant. Commercial gate repairs in Brooklyn typically run $350 to $1,200 depending on the operator and the extent of the damage. We provide a written price before any work begins, and we work around your schedule so the gate isn’t down during peak hours.
Operator and Safety Loop Repair
Most commercial gate failures we see are in the operator or the detection loops. A broken loop under the asphalt means the gate can’t sense a waiting car, which is a safety and code issue, not just a convenience problem. We locate the break, cut and replace the loop, and seal it before we leave.
High-Cycle Hardware
A commercial gate cycles a hundred times a day, which wears out rollers, hinges, and guide wheels fast. We install commercial-grade hardware rated for that kind of use, not the residential parts that fail in six months.
Iron Gate Repair
Iron Gate Repair is about preserving the look of your gate while fixing the damage. Wrought iron and cast iron gates in Brooklyn are often decades old, and they develop rust at the joints, cracks at the welds, and sag at the hinges. We repair rather than replace wherever the metal is still sound, and our welders match the original profile so the repair doesn’t change the character of the gate. Most iron gate repairs in Brooklyn fall between $225 and $650, depending on how much rust has to be cut out and whether we need to build new pickets or scrollwork.
Rust Repair and Prevention
We grind out rust to clean metal, reinforce any thinning sections, and seal the repair. The goal is to stop the rust from returning the way it was before, not just cover it with paint for one season.
Ornamental Matching
When a picket or a scroll breaks, we fabricate a match from bar stock rather than leaving a gap or forcing a mismatched piece. On older Brooklyn gates, that’s often the difference between a repair that’s invisible and one you’ll notice every day.
Sliding Gate Repair
Sliding Gate Repair is one of our most common calls in Brooklyn because so many driveways and commercial entrances use cantilever and track-style sliders. When a sliding gate starts binding, it’s usually an alignment issue, a flattened roller, or a track that’s packed with gravel and salt. We rebuild the roller assemblies, perform Gate Realignment on the track, and adjust the operator so the gate doesn’t strain against its own weight. Sliding gate repairs in Brooklyn generally run $275 to $700 depending on the damage and whether the operator needs reprogramming after the repair.
Roller and Truck Replacement
The rollers on a sliding gate are load-bearing, and once one flattens, the gate drags and the motor works twice as hard. We replace rollers in sets, not singles, so the load is even across the gate and the repair lasts.
Track Cleaning and Alignment
Road grit gets ground into the track and starts acting like sandpaper. We clean the track channel, check the alignment with a straight edge, and reset the gate so it glides instead of grinding. A free alignment check is part of every sliding gate repair.
Wrought Iron Gate Repair
Wrought Iron Gate Repair involves more than just welding cracks. These gates are built from forged sections, and the original joinery is often what fails first after years of Brooklyn winters. We re-secure loose joints, repair cracked rails, replace damaged pickets, and repaint using colors that match your existing finish. Wrought iron gate repair in Brooklyn typically costs $300 to $800, depending on the number of damaged sections and the amount of fabrication involved. You’ll get the full price in writing after we inspect the gate, before any torch is lit.
Joint and Socket Repairs
Wrought iron gates fail at the joints where water works its way inside and rusts the connection. We disassemble the loose joint, clean the socket, and re-secure it with fresh weld or mechanical fasteners depending on the original construction.
Picket Replacement
When a picket is bent or broken, we remove it at the rail and weld in a replacement of the same width and profile. The repair is ground and painted to match the patina of the surrounding metal, so it doesn’t jump out at you from the street.
Metal Gate Repair
Metal Gate Repair covers the broad category of steel, aluminum, and iron gates we see throughout Brooklyn. Aluminum gates dent and crack at the welds, steel gates rust at the base, and iron gates develop stress fractures. We repair all of it, and we tell you honestly when a gate has reached the point where repair doesn’t make sense. Metal gate repairs in Brooklyn generally cost $195 to $600, with rust repair on the lower end and structural reinforcement on the higher end. The price is written before work begins, and it doesn’t change after we start.
Aluminum Crack Repair
Aluminum gates crack at the top corner of the frame, especially when an operator pushes the gate off its natural swing. We re-weld the cracked section, reinforce the inside of the frame, and adjust the operator so the same stress doesn’t come back.
Steel Post Replacement
When the post is rotted at ground level, rehanging the gate on the old post only buys a few months. We set a new post in concrete, true it to the gate, and rehang everything so the gate swings clean and the latch lines up.
Wood Gate Repair
Wood Gate Repair in Brooklyn has its own set of problems: wet winters, humid summers, and the constant racking of a heavy gate on soft ground. We replace rotted stiles and rails, rebuild hinges with longer screws that bite into fresh wood, and re-true gates whose frames have twisted out of square. Wood gate repairs in Brooklyn typically run $195 to $550 depending on how much of the frame has to be replaced. We use pressure-treated lumber for ground contact and cedar or redwood for visible rails, matched to what’s already on your gate.
Frame Rebuild and Squaring
A wood gate that drags is usually out of square. We remove the gate, re-square the frame with heavy-duty corner braces, and rehang it so the latch and hinge line up. If the wood is sound, this saves a full replacement.
Rot Repair at the Bottom Rail
The bottom rail is always the first to go because it sits closest to wet ground and splashback. We cut out the rotted section, splice in new lumber, and seal the joint so water doesn’t wick up into the frame.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
LiftMaster is the brand we see most often on Brooklyn driveway gates, especially on single-family homes. Our technicians are factory-trained on the current models, and we stock the common boards, remotes, and safety sensors so the repair usually happens on the first visit. FAAC and BFT operators are common on condo and commercial gates, and we keep their limit switches and control boards on the truck as well. We’ve worked on enough Mighty Mule controls to know their quirks, particularly around wireless edge sensors and battery life.
Whether you have one of those brands or something less common, we can help. The brand matters less than the diagnosis: a gate that won’t open is usually a bad connection, a failed sensor, or a worn mechanical part, and those follow the same logic across every manufacturer.
Signs You Need a Pro Right Now
- The gate leans or sags toward the latch side. The hinges or the post itself are failing, and every open and close adds strain. The longer it leans, the more the frame twists and the more expensive the repair becomes.
- The motor runs but the gate barely moves. This usually means a stripped gear, a broken coupling, or a gate that’s binding against the track. Running the motor in this condition burns it out, and a new operator costs more than the repair would have.
- The gate reverses for no reason, or won’t stay open. Safety sensors, limit switches, and the control board are the likely culprits. A gate that reverses mid-cycle is a code violation in most cases, and a gate that won’t stay open is a daily frustration you don’t have to live with.
- You hear grinding or a loud clank when the gate moves. That sound is metal on metal. Whether it’s a roller, a hinge, or the drive chain, something is wearing out and chewing through material.
- The gate won’t close at all, leaving the yard open. In Brooklyn, an open gate means a dog in the street and a delivery person wandering into the yard. We treat this as an urgent call and get someone out the same day in most neighborhoods.
Our Process, Step by Step
- 1
Call (934) 649-3673 and talk to a person. No voicemail, no callback queue. You describe the problem, we ask a few questions about the gate and the opener, and we schedule a time that works for you. If it’s urgent, we’ll work to get there the same day.
- 2
We inspect and diagnose. The technician goes over the gate, the hardware, and the operator with a multimeter and a straight edge, not just a visual once-over. We check the post for rot or rust, the hinges for play, the rollers for flat spots, and the electrical connections for voltage.
- 3
You get a written price. Before any work starts, we hand you a written quote that includes parts, labor, and tax. You don’t have to accept it, and there’s no pressure. Most Brooklyn homeowners tell us this is the part they appreciate most.
- 4
We do the work and protect your space. Shoe covers and drop cloths go down before we step inside, and we use quiet tools when kids are asleep. If a pet is in the yard, we ask before we move anything. Every job follows the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we touch anything, Respect the family’s time, Explain the price before the work.
- 5
We show you the clean-up before we leave. A photo of the work area, cleaned and reset, goes to you before the technician gets back in the van. And the 365-Day Done Right Promise covers every repair: if it’s not right, we make it right.
How Much Does Gate Repair Cost in Brooklyn?
A typical gate repair in Brooklyn runs $195 to $700, with most jobs falling in the $250 to $450 range. A simple latch replacement might be under $200, while a full post replacement with new concrete and rehanging the gate can reach $800 or more. Electric operator repairs tend to fall between $275 and $600 depending on the part, and commercial gate work starts around $350 because of the heavier hardware and code requirements.
What affects the price: the type of gate (wood, iron, aluminum, steel), the extent of the damage, the accessibility of the post or track, and whether operator programming is needed after the mechanical repair. In Brooklyn, salt and moisture add a rust factor that technicians further inland rarely deal with, which is why some repairs cost slightly more here than they would in drier markets.
How to avoid overpaying: get the price in writing before work starts. Ask whether the quote includes all parts, labor, and any disposal fees. And be wary of anyone who quotes a price over the phone without seeing the gate, because a gate that looks simple from the curb can hide a rotted post or a failed operator. A free estimate from Latch and Post Gate Repair Brooklyn includes the full inspection, the diagnosis, and a written price. You’ll know the number before you agree to anything.
You can find more detail on our Gate Repair in New York page, but the short version is this: we never charge for the visit, and you never pay a cent until you’ve seen the number on paper.
Our Service Area Near Brooklyn
We serve all of Brooklyn, from Greenpoint down to Brighton Beach and from Bushwick over to Bay Ridge. Our technicians work regularly in Gate Repair in Financial District as well, along with Canarsie, Maspeth, Astoria, Flatbush, Bedford-Stuyvesant, Elmhurst, and Howard Beach. If you’re in or near any of those neighborhoods, call (934) 649-3673 and we’ll schedule a visit. Most Brooklyn callers get same-day or next-day service.
Serving Brooklyn, NY - Our Local Coverage Area
We’re based in the Brooklyn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Brooklyn
Gate repair means fixing the physical gate or its operator so the gate opens, closes, and latches correctly. It includes everything from replacing a broken latch and re-welding a hinge to rebuilding a post and reprogramming an electric opener. We don’t push replacement when a repair will hold, and we’ll tell you plainly when the gate is past saving.
Most residential gate repairs in Brooklyn take between 1 and 3 hours on site. The job includes the diagnosis, the repair, and the clean-up, so you’re not waiting around half the day. If we need to pour concrete for a new post, that adds a day of cure time before we rehang the gate.
Expect $195 to $700 for most repairs, with simple latch fixes under $200 and full post replacements up to $800.
For a more complete answer, see the pricing section above, or call (934) 649-3673 for an exact quote after an inspection. Estimates are free and the price is always in writing before work begins.
Yes. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we stock the common parts for all of them. Whether the problem is a control board, a limit switch, or a worn gear, we usually have the part on the truck and can fix it the same day.
Yes. A live person answers calls 24 hours a day, 7 days a week, including nights, weekends, and holidays. We treat a gate that won’t close as urgent because most Brooklyn homes need a working gate for pet safety and to keep the yard secure. Call (934) 649-3673 and we’ll tell you honestly when we can get there.
Every repair and installation is covered by the 365-Day Done Right Promise. If it’s not right, we make it right, no argument and no fine print. That’s the same promise that’s covered our work since 2009.
Just make sure the gate is accessible and clear any clutter from the path. If you have a dog that uses the yard, keep them inside during the visit if possible. We’ll bring shoe covers and drop cloths so your floors stay clean, and we’ll call before we arrive so you’re not caught off guard.
Schedule Your Gate Repair Service in Brooklyn Today
A gate that won’t close, a latch that won’t catch, or a post that’s leaning: call (934) 649-3673 and we’ll come take a look. You’ll get a written price before any work starts, and if it’s not right, we’ll make it right, that’s the 365-Day Done Right Promise. One call, one visit, a gate that works the way it should. Reach out on our home page or call us now.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Brooklyn since 2009.