Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Canarsie, NY
Canarsie’s mix of 1930s – 1960s brick homes and original steel gates means most gate work here comes down to the same two problems: rust from Jamaica Bay’s salty air, and sagging hinges on posts that have shifted in sandy soil. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus only on gates. The latch that holds the gate, the post that carries it, and the electric opener that moves it. If your gate sticks, scrapes, or won’t close at all, call (934) 649-3673 for a written price before any work starts.
Why Canarsie Homes Are Different
Canarsie sits close enough to Jamaica Bay that the breeze carries salt over the streets most days, and that changes how gates age. Steel and iron rust faster here than they do ten miles inland. We see bottom hinges that lock up within five to seven years on blocks east of Remsen Avenue, where the Paerdegat Basin breeze hits them directly. The fix is usually not just a new hinge but a corrosion-resistant stainless or galvanized replacement, plus adjustment so the gate doesn’t drag on the latch post.
Many Canarsie homes were built between the 1930s and 1960s, and a lot of the driveway gates are original to the house. The chain-link fences and steel gates from that era were built on shallow footings, and after decades of rain, sometimes flooding, the post can lean just enough to throw the whole gate out of square. Coastal storms push this harder. A gate that scrapes the concrete or won’t latch after a storm usually has a post problem underneath the visible rust. We check the post before we quote the repair, because tightening hinges on a sinking post just shifts the problem down the line.
Styles & brands we work with
Our Main Canarsie Services
Most Canarsie calls come down to one of three jobs: a gate that won’t hold, a gate that needs replacing, or an electric opener that stopped responding. Each has its own page with Canarsie-specific pricing and details.
Gate Repair in Canarsie
When a driveway gate stops latching or starts scraping the walk, the cause in Canarsie is usually rust at the hinge or a shifted post. We carry replacement hinges, latches, and post brackets sized for the steel and iron gates common on Canarsie’s mid-century homes, and we’ll quote the exact repair before we touch anything. Salt-air rust is normal here, not a sign the whole gate needs replacing. See Gate Repair in Canarsie for what a typical Canarsie repair involves and what it costs.
Gate Installation in Canarsie
New gates in Canarsie need anchors that can hold up to sandy soil and the occasional flood. We pour deeper footings than the old ones had, use galvanized or powder-coated steel, and set the post so the gate swings clean over sloped driveways and sidewalks. We’ll measure, quote, and schedule the install without pressure, and you’ll get the written price before any work is ordered. Full details are on the Gate Installation in Canarsie page.
Electric Gate Repair in Canarsie
Salt air is hard on circuit boards and motors too. When an electric gate won’t open or stops midway, the issue is often a corroded connection, a weak transformer, or a sensor knocked out of alignment by wind. We work on the openers Canarsie homes actually have, and we carry common parts for the local equipment. The repair starts with a diagnostic, then a written quote. Read more on the Electric Gate Repair in Canarsie page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Canarsie
We’re factory-trained on the brands families in Canarsie actually run: LiftMaster, FAAC, Mighty Mule, and BFT, plus a few others. We stock common circuit boards, remote receivers, and hinge kits so most repairs don’t wait on a parts order. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Canarsie, NY
| Service | Typical range in Canarsie |
|---|---|
| Gate latch repair | $145 – $285 |
| Hinge replacement (steel post) | $190 – $410 |
| Gate post reset and re-anchor | $320 – $620 |
| Gate frame straighten after storm | $240 – $540 |
| Basic steel driveway gate (installed) | $1,300 – $2,800 |
| Electric opener repair (logic board) | $280 – $580 |
| Electric opener replacement | $820 – $1,700 |
| Safety sensor replacement | $150 – $330 |
| New gate lock or latch (electric) | $210 – $440 |
What pushes a Canarsie quote up is usually the rust underneath: a hinge that looks simple may have corroded the post it’s bolted to, and that post may need sleeve work or replacement. Always, the written price is on the table before we start, and the number we quote is the number you pay.
Neighborhoods We Serve in Canarsie
We cover Canarsie from the old Italian blocks near Remsen Avenue over to the semis along Flatlands Avenue and the pier-side streets beyond. Crews work the whole neighborhood, typically scheduled within a few days for non-emergency work.
- Canarsie Heights
- South Canarsie (east of Paerdegat Basin)
- Avenue blocks near 92nd through 103rd Streets
- Remsen Avenue corridor
- Flatlands Avenue and surrounding streets
Service Area – Cities Near Canarsie
Beyond Canarsie, we also take calls from Brooklyn neighbors in Brooklyn, NY, over in New York, NY, and in Financial District, NY or Maspeth, NY. Dispatch is coordinated from the New York City office, and each job gets the same written-price promise.
Serving Canarsie, NY - Our Local Coverage Area
We’re based in the Canarsie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Canarsie
We answer the phone around the clock, and a live person takes your details, not a voicemail. If a gate is stuck open or won’t close and the house is unsecured, we’ll give you the soonest real arrival window when you call. Non-emergency repairs are typically scheduled within a few days.
Most repairs don’t need a permit. Full replacement on a driveway gate usually doesn’t either if the gate stays in its existing footprint, but every block is different. We’ll tell you during the quote if your situation looks like it needs a pull, and we can often handle the paperwork. Call us to ask about your specific block.
That’s the most common request we get in Canarsie. We’ll check the post, hinge, and latch before recommending anything, and we’ll quote the repair separately from any replacement. If the gate can be saved, we’ll save it. The written quote shows both paths so you decide.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Canarsie Customers Say
"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman