Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Greenpoint, NY
Gate work in Greenpoint calls for someone who knows this neighborhood’s particular rhythm: pre-war brick rowhouses with original cast-iron gates, converted loft buildings with heavy rolling steel doors, and sidewalks where decades of road salt have worked against every hinge pin. We’re Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists. We focus on one thing: gates, and the latch and post that carry them. If your gate needs attention in Greenpoint, call (934) 649-3673 and you’ll get a live person, any hour.
Why Greenpoint Homes Are Different
Greenpoint’s housing stock runs mostly to 3-and-4-story brick and wood-frame rowhouses built between 1880 and 1920. Many still have their original cast-iron or steel gates, which means we regularly work on hardware that has been opening and closing for over a century. These gates are narrow, set tight to the street, and often sit less than two feet from the sidewalk. That proximity matters: street plow runoff and rock salt collect at the gate base, and the lower hinge pins on gates along Manhattan Avenue and Franklin Street tend to corrode first. We check there before anywhere else.
The East River shapes the work too. Salt-laden air, freeze-thaw cycles through the winter, and low-lying streets with older drainage can leave standing water at gate bases after a heavy rain or snowmelt. We see the result as accelerated rust and swollen or seized posts. Larger converted factory buildings, common up near the old ropeworks and warehouse blocks, often feature rolling or sliding industrial gates with hardware sized to historic dimensions. Those need parts matched carefully, not improvised. We’re also mindful of MTA-related vibration from the nearby subway tunnels, which can gradually loosen gate hardware even when a gate looks fine from the driveway.
Styles & brands we work with
Our Main Greenpoint Services
The two calls we get most from Greenpoint homeowners are for gates that won’t swing or latch properly, and for electric gates that have stopped responding. Each service has its own Greenpoint page with pricing, local detail, and answers to the questions families ask.
Gate Repair in Greenpoint
Most repair calls in Greenpoint start with a gate that drags on the sidewalk, a latch that won’t catch, or a hinge that has rusted through near the base. Our Gate Repair in Greenpoint page covers what we typically find, how we quote the work, and the 365-Day Done Right Promise behind every fix. Because so many Greenpoint gates are original to their buildings, we match replacement hardware to the existing holes and patina where we can, instead of leaving a shiny new plate on a hundred-year-old gate.
Gate Installation in Greenpoint
New gate work in Greenpoint means fitting a gate to a narrow frontage, often on a sloped sidewalk where drainage is poor. Our Gate Installation in Greenpoint page explains how we measure, what we recommend for cast-iron replacements and modern steel, and how the written-price routine works before any work begins. We can also advise on hardware choices that stand up to salt and standing water better than standard off-the-shelf options.
Electric Gate Repair in Greenpoint
Electric gates near the river deal with moisture and cold that are harder on boards, sensors, and wiring than most installers expect. Our Electric Gate Repair in Greenpoint page walks through common failure points, the brands we service, and what a same-visit diagnosis actually looks like. We carry parts for LiftMaster, FAAC, BFT, Mighty Mule, and other common residential and light-commercial operators.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Greenpoint
Our technicians are factory-trained on the brands Greenpoint families actually have installed: LiftMaster, FAAC, BFT, and Mighty Mule among them. We keep common boards, remotes, and hinge hardware stocked locally, which shortens turnaround on most repair visits. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Greenpoint, NY
| Service | Typical range in Greenpoint |
|---|---|
| Gate latch replacement | $140 – $260 |
| Hinge repair or replacement (per hinge) | $90 – $190 |
| Gate realignment and adjustment | $130 – $250 |
| Weld repair on steel or iron gate | $180 – $420 |
| Gate post reset or reinforcement | $320 – $690 |
| Full gate replacement (standard walk gate) | $950 – $2,400 |
| Electric gate operator repair | $240 – $520 |
| Electric gate operator replacement | $850 – $2,100 |
| Keypad, remote, or intercom replacement | $180 – $410 |
| Safety sensor or edge replacement | $170 – $360 |
In Greenpoint, the biggest price drivers are rusted-in or snapped hinge pins at the sidewalk, posts that have shifted after years of freeze-thaw cycles, and the extra care needed when matching hardware to historic gate dimensions. Whatever the job, you’ll get a written price before any work starts, and that number is what you pay. No surprises after the fact.
Neighborhoods We Serve in Greenpoint
We work across the whole of Greenpoint, from the blocks near McCarren Park to the waterfront streets along the East River. Most repair calls can be scheduled same-week, and emergency calls are answered live around the clock.
- North Greenpoint
- Greenpoint Historic District
- McCarren Park area
- Manhattan Avenue corridor
- Franklin Street and the waterfront
Service Area – Cities Near Greenpoint
While Greenpoint is our focus, we often help neighbors in adjacent communities. Our service area reaches into Brooklyn, NY, including Canarsie, NY, as well as New York, NY and the Financial District, NY. If you’re unsure whether we cover your block, call us and we’ll confirm right away.
Serving Greenpoint, NY - Our Local Coverage Area
We’re based in the Greenpoint area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Greenpoint
Most standard repairs in Greenpoint are scheduled within a few business days. If a gate is stuck open or won’t close at all, call (934) 649-3673 and a live person will help you sort out the best move right then. We answer 24/7, including weekends and holidays.
In most Greenpoint cases, repairing an existing gate on your own property does not require a permit. Full replacements or new installations can sometimes trigger landmark or building department review, especially in the Greenpoint Historic District. We can guide you to the right questions before work begins.
We cover all of Greenpoint, from North Greenpoint to the waterfront. Our dispatch and scheduling are coordinated from the brand’s New York City office, but the crews working in Greenpoint are local to the area and know these blocks well. Call (934) 649-3673 to schedule or ask about your street.
About a third of the time, what looks like a serious gate failure is a simple adjustment: a misaligned latch, a loose hinge bolt, or a sensor knocked out of position. We’ll tell you what’s actually needed, and you’ll see the price in writing before anything is done. No pressure to add work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Greenpoint Customers Say
"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Careful and considerate from start to finish. Our kids were playing in the yard and the crew was mindful of them the whole time. Gate opens like new and the area was spotless after."
- Marcus Teague