Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Bensonhurst
Electric gate repair in Bensonhurst usually costs between $185 and $520 depending on the part that failed, and most motor and sensor issues can be diagnosed the same day. We work on the ornamental steel gates and tight rear-garage setups this neighborhood is known for, where a gate that won’t close isn’t just annoying, it leaves your backyard and tools exposed to the alley. Our team knows the driveways off 18th Avenue, 86th Street, and Bay Parkway, and we’ll give you a written price before any work starts. Call (934) 649-3673 to talk to a live person, any hour.
Why Latch and Post Gate Repair Brooklyn Is Bensonhurst’s Preferred Electric Gate Repair Company
Bensonhurst homeowners call us because we focus on gates and nothing else, and because the crew that shows up treats your house the way you’d want a neighbor to. We’ve been part of the Cedarwell family since 2009, and every visit comes with shoe covers, drop cloths, and a cleanup photo before the technician leaves. On a rear garage off Stillwell Avenue, that mattered as much to the homeowner as the repaired motor did, and she said so in her review.
Cody Beckman leads our team, and he built the routine around a simple idea: a written price first, clean floors during, and a photo of the clean-up after. That’s the Cedarwell Care Promise, and it applies whether we’re replacing a LiftMaster control board near New Utrecht Avenue or realigning a Mighty Mule arm on a gate by Gravesend Bay. Our response time to Bensonhurst is typically same-day for motor failures and stuck gates, and every call is answered by a person, not a recording.
Styles & brands we work with
Automatic Gate Repair in Bensonhurst
Automatic Gate Repair in Bensonhurst usually means diagnosing why a swing or slide gate won’t open, won’t stop, or won’t close all the way. Many of the automatic gates here are custom-fitted steel or aluminum models mounted in spaces barely wider than the gate itself, so a misaligned track or a failing sensor shows up fast. The work typically runs $220 to $480, with the higher end covering a new safety sensor set or a rebuilt operator arm. We quote that number in writing before touching a single bolt.
Safety Sensor and Photocell Alignment
On narrow shared driveways, safety sensors take a beating from weather and passing trucks. We re-align or replace photocells so the gate won’t reverse at random or refuse to close, common on Bensonhurst rear garages where the sensors sit close to brick walls that confuse the beam.
Limit Switch and Travel Adjustment
When a gate stops a foot short of the latch post or pushes too hard against it, the limit settings inside the operator are off. We recalibrate travel, torque, and auto-close timing so the gate seats gently instead of slamming or stalling.
Electric Gate Motor in Bensonhurst
Electric Gate Motor work in Bensonhurst means swapping or repairing the motor unit that powers your swing or slide gate, and matching the new motor to the weight and duty cycle of the gate it’s driving. Motor work here runs $310 to $720 installed, with the price shaped by the gate’s weight, the operator type, and whether we’re retrofitting an older arm to a newer board. We’ll show you that number in writing before we begin.
Underground Operator Service
Some Bensonhurst front gates use underground operators hidden below the hinge post, which keep the look clean but trap moisture and road salt. We open the vault, clean the corrosion, reseal the housing, and replace the motor if it’s burned out, often restoring a silent original setup without digging a new pit.
Retrofit to a New Motor
If your existing Viking or FAAC motor has failed and the operator is discontinued, we can retro-fit a current LiftMaster arm or slide operator to your existing gate and brackets. This avoids full gate replacement and usually saves $400 to $900 over a complete new system.
Trusted Brands We Service in Bensonhurst
We’re factory-trained on the brands families around Bensonhurst actually own, including Mighty Mule, LiftMaster, and FAAC. Because we stock or can quickly source boards, arms, and sensors for those lines from our New York City office, most repairs here happen in one visit rather than two. That speed matters when your gate opens onto a shared driveway off 20th Avenue and you need your car out in the morning.
Common Electric Gate Repair Problems We See in Bensonhurst Homes
- Slide gate tracks dinged by garbage trucks on shared driveways. The trucks that squeeze down 10-foot-wide access alleys graze gate tracks repeatedly. That bends the rail or knocks the rack gear out of line, and the gate starts binding mid-travel or stops entirely.
- Salt air rusting hinge posts and operator housings. Coastal air from Gravesend Bay works on unsealed steel all year. Hinge pins seize, motor housings corrode through, and a gate that worked quietly in spring groans by October.
- Freeze-thaw cycles shifting posts in sandy soil. Bensonhurst sits on loose, sandy ground, and winter frost heaves hinge posts a few centimeters out of plumb. That tilts ornamental steel gates and makes the latch side drag on the ground.
- Torque limiters tripping daily from impact damage. When a delivery van clips a rack-and-pinion drive, the operator’s safety clutch slips every cycle. We realign the rack and reset the torque so the motor stops fighting itself.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Bensonhurst, NY
A service call to diagnose an electric gate issue in Bensonhurst runs $95, and that’s credited toward the repair if we do the work. Sensor or keypad fixes mostly land between $185 and $310. Motor replacement sits between $310 and $720 depending on the operator and gate weight. A full control board swap on a LiftMaster or FAAC unit usually runs $340 to $560 with the part included. You’ll always get a written price before we start, and Cody Beckman’s team won’t start until you approve it.
We Also Serve Cities Near Bensonhurst
Besides Bensonhurst, our Electric Gate Repair crews schedule work in Brooklyn, New York, Financial District, and Canarsie. If you or a family member lives in one of those areas, the same written-price promise and cleanup routine applies. Read more about our full Electric Gate Repair in Bensonhurst coverage if you’re deciding who to call.
Serving Bensonhurst, NY - Our Local Coverage Area
We’re based in the Bensonhurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Bensonhurst
Garbage trucks grazing your shared driveway have almost certainly bent the track or knocked the rack gear out of alignment, so the rollers catch and the gate binds mid-travel. We realign or replace the track section and re-bed it on a solid footing so the next truck bump doesn’t knock it loose again. Call (934) 649-3673 for a same-day look at the track.
Yes, we weigh the gate and check its hinge geometry before recommending a motor, so a new LiftMaster or FAAC operator gets matched to the actual load and duty cycle of your existing ornamental gate rather than a generic spec. The retrofit usually runs $310 to $720 installed. We’ll put the exact number in writing before any work begins.
A loop detector senses a vehicle’s metal mass and prevents the gate from closing on a car that’s still in the travel path, which matters on shared driveways where you can’t always see the gate from the street. Many older Bensonhurst rear gates lack one, and we can add a sensor loop or an edge sensor for $260 to $420 so the gate won’t close against your bumper. Estimates are free.
Freeze-thaw movement in the sandy soil around Bensonhurst pushes one hinge post slightly out of plumb, and the heavy steel gate then leans toward the latch side. We correct the post, re-bed it in compacted aggregate, and adjust the hinges so the gate swings free and quiet again.
Grid-tied openers with a battery backup are the more reliable choice for Bensonhurst rear gates because shaded, tight spaces between brick walls don’t always give a solar panel enough sun. We can wire a battery backup into your existing unit for $220 to $380 so the gate still opens during a power failure. Call (934) 649-3673 and we’ll tell you what your gate actually needs.
Bensonhurst Gate Repair, Done the Careful Way
Every gate comes down to two parts: the latch that holds it and the post that carries it. In Bensonhurst, those two parts live inside cramped driveways, in salty air, and on soil that moves. If your electric gate is grinding, refusing to open, or closing when it shouldn’t, call (934) 649-3673 for a free estimate. The price is in writing before work starts, shoe covers go on at your door, and you get a photo of the cleanup before we leave.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Bensonhurst since 2009.