Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Crown Heights
Electric gate repair in Crown Heights typically runs $220 to $680 for most motor, board, and sensor fixes, with same-week scheduling available in most weeks. We work on the old gates this neighborhood is known for: original iron gates on brownstone stoops, prewar co-op driveway gates along Eastern Parkway, and everything in between. Our techs carry parts for LiftMaster, FAAC, BFT, and Mighty Mule, and we know Crown Heights’s Landmarks Preservation Commission rules well enough to tell you before work starts whether a repair needs board review. Call (934) 649-3673 and a live person answers, day or night.
Why Latch and Post Gate Repair Brooklyn Is Crown Heights’s Preferred Electric Gate Repair Company
Crown Heights has more century-old iron gates per block than almost any neighborhood in Brooklyn. That’s a fact we think about every time we roll up to a limestone rowhouse with a gate that has outlived three generations. We’re not a general handyman service. Gate repair is the only work we do, and within that, Electric Gate Repair is a specialty we’ve built our whole crew around
What Crown Heights customers tell us they notice is the routine. A background-checked technician in uniform arrives, puts on shoe covers before stepping into the entryway, lays a drop cloth under the gate track or control box, and writes down the price before touching a single screw. After the job, you get a photo of the cleaned-up work area. That’s the Cedarwell C.A.R.E. routine, and it is not an upsell. It’s how every visit works.
Our Crown Heights work has taught us the local patterns. Co-op board approvals, salt-corroded post footings, knob-and-tube wiring still feeding old operators. The more of these we fix, the faster we diagnose the next one. Written price in hand before any work starts, every time. That’s a promise.
Styles & brands we work with
Automatic Gate Repair in Crown Heights
Automatic gate repair in Crown Heights usually means one of three things: a motor that turns but the gate doesn’t move, a gate that opens on its own at 3 a.m., or a keypad that has stopped accepting the code every family member knows by heart. Most automatic gate repairs in this neighborhood run $180 to $450 for common failures like stripped rack and pinion gears, worn limit switches, and failed photo-eye sensors.
Older Crown Heights gates add a particular complication. Many automatic systems here were retrofitted onto gates that were never designed to carry a motor, and decades of freeze-thaw cycles have shifted the hinge posts enough to strain the operator on every cycle. We check the post alignment before replacing any motor. Otherwise you’re paying for a new motor that will strip itself again in two winters.
Control Board and Wiring Repairs
When a Crown Heights gate operator starts behaving erratically, the control board is usually the first suspect. Boards on legacy systems fail after seasonal power surges, and many obsolete chips have no compatible replacement. We can often source a rebuilt board, but we will tell you honestly when a full motor retrofit costs less than chasing a discontinued part.
Sensor and Entrapment Protection
Automatic gates in New York must have working entrapment protection. On older Crown Heights gates, that often means retrofitting current photo-eye sensors onto hardware that predates the requirement. It’s straightforward work, and it’s the difference between a gate that is convenient and a gate that is safe for kids and pets.
Electric Gate Motor in Crown Heights
Electric gate motor replacement in Crown Heights starts around $650 and runs up to $2,400 depending on the gate’s weight, the operator type, and whether we can reuse the existing bronze or cast-iron housing. A motor that hums but won’t turn, or a gate that moves a few inches and stops, usually points to a seized motor or stripped gear. We diagnose before we recommend replacement, and the written price covers everything: the motor, the labor, the cleanup, and the walkthrough.
On Eastern Parkway, our techs replaced a seized Viking gate operator on a 1930s co-op driveway gate. The original bronze rack and pinion had stripped, and the loop detector was wired into knob-and-tube circuitry. We installed a FAAC operator with a safety photocell and reused the bronze housing to satisfy the board’s landmark requirements. That’s the kind of job that makes us useful in Crown Heights specifically.
Operator Retrofit vs. Full Replacement
Some Crown Heights boards won’t approve a motor swap that changes the gate’s footprint. But a retrofit can often put a modern LiftMaster or FAAC operator inside the original housing and keep the ornamental bronze hardware untouched. When that’s possible, the cost drops and the board conversation gets much simpler.
Gear and Rack Repairs
Many Crown Heights electric gates use rack and pinion drives, and those racks wear unevenly when the gate sags. We machine or source replacement racks, then correct the hinge post alignment so the new parts don’t fail the same way.
Trusted Brands We Service in Crown Heights
Our techs are factory-trained on the brands Crown Heights families actually own: LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule, and Linear. We keep common boards, limit switches, photo-eyes, and remotes stocked for Crown Heights service calls, which means fewer second visits. If you have a LiftMaster operator from the 2000s or a FAAC unit the board approved, we’ve likely worked on that exact model in a Crown Heights rowhouse or co-op before.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Crown Heights Homes
- Salt-corroded post footings. Sidewalk de-icing salts splash onto gate posts all winter on Franklin and Nostrand Avenues. The corrosion creeps up, the post shifts, and suddenly the gate drags and the motor pulls double amperage. We fix the alignment and reinforce the footing before the motor burns out.
- Obsolete control boards with no replacement chips. Prewar buildings and brownstones often have original operator boards that simply cannot be sourced anymore. We’ll tell you straight: a retrofit to a modern FAAC or LiftMaster board is usually cheaper than nursing a dying legacy board through another summer.
- Freeze-thaw hinge sag. Crown Heights winters throw freeze-thaw cycles at every iron gate in the neighborhood. Hinges loosen, posts lean a quarter inch, and the gate starts scraping the areaway paving. We square the gate, rebuild or replace the hinges, and the motor stops straining.
- Photo-eye faults from salt spray. De-icing salt aerosolizes and coats photo-eye housings, triggering intermittent entrapment sensor faults. The gate reverses mid-cycle or refuses to close. Cleaning and resealing the sensor housings fixes most cases; we replace the eyes when the lenses are permanently clouded.
Pricing for Electric Gate Repair in Crown Heights, NY
Here are real numbers for Crown Heights work. A keypad replacement runs $120 to $260. A remote control pairing or replacement costs $80 to $180. Photo-eye or safety sensor repair lands between $150 and $320. A control board swap is $280 to $750 depending on the board. A full gate motor replacement starts at $650 and runs up around $2,400 for heavier driveway gates. The written price you get before work starts includes the part, the labor, and our clean-up routine. No line item appears later that you didn’t approve. Call (934) 649-3673 for a free estimate. We’ll come out, diagnose the gate, and hand you a written number with no pressure to accept.
We Also Serve Cities Near Crown Heights
Beyond Crown Heights, our crews serve Electric Gate Repair in Crown Heights alongside neighbors in Brooklyn, New York, the Financial District, and Canarsie. If you’re just outside the neighborhood, call (934) 649-3673 and we’ll confirm coverage. Same written price promise, same shoe covers and drop cloths.
Serving Crown Heights, NY - Our Local Coverage Area
We’re based in the Crown Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Crown Heights
In most cases, yes. Repairs that reuse the original bronze housing, keep the gate’s existing footprint, and don’t alter visible ornamental details generally don’t require LPC review. A motor retrofit inside existing bronze housing, like the FAAC operator we installed on a 1930s Eastern Parkway co-op, satisfies board requirements without triggering a landmark application. If the work would alter the visible hardware, we’ll flag that before you pay for anything. Call (934) 649-3673 and we’ll tell you what your specific gate needs.
Winter power surges are the usual culprit in Crown Heights, especially on older buildings with knob-and-tube or undersized wiring feeding the gate operator. When the grid flickers during a nor’easter, the board takes the hit. We install surge protection on the gate circuit as part of any board replacement, which stops the repeat failures. A new board with proper surge suppression typically runs $280 to $750 installed.
Usually hinge and post work, not a new motor. Crown Heights freeze-thaw cycles shift hinge posts and sag the gate, which overloads the motor and strips the gears. We square the gate, rebuild or replace the hinges, and realign the post. In most cases that restores smooth operation for $180 to $450. If the motor has already been damaged by months of straining, we’ll show you the failed part and give you a written number for the replacement before any work starts.
Yes. UL 325 applies to all automatic gate operators in New York, including gates installed long before the standard existed. That means working photoelectric sensors, proper reversing mechanisms, and installation by a trained professional. Older Crown Heights gates often need retrofitted photo-eyes and current safety edges. We handle that as part of any motor or board repair. Safety sensors are not a corner we’ll cut.
We retrofit a modern operator inside the existing bronze housing. LiftMaster and FAAC both make units compact enough to fit within original bronze enclosures, preserving the landmark-visible hardware while giving you a current motor, board, and entrapment protection. This approach usually keeps the co-op board conversation short because the building’s architectural character doesn’t change. We’ll photograph the before and after so you can show the board exactly what was preserved.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Crown Heights families, co-ops, and brownstones as part of the Cedarwell family since 2009.