Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Brooklyn?
Gate repair in Brooklyn typically costs between $185 and $590, with most homeowners paying around $310 for common fixes like latch replacement, hinge adjustment, or sensor realignment. Electric gate repairs run higher, usually $425 to $1,100, because they involve circuit boards, motors, and safety sensors. You’ll see the exact number in writing before we touch anything, so there’s no guesswork on the day of the job.
Those figures reflect what we see across Brooklyn in 2026, from Gate Repair in Brooklyn calls in Bay Ridge to electric gate diagnostics in Mill Basin. The price depends on the gate type, the part that failed, and whether the post or the operator needs work. Below, we’ve broken down every line item so you know what a fair price looks like before you call anyone.
Gate Repair Cost Breakdown (2026)
Here’s what Brooklyn homeowners can expect to pay for the most common gate repairs this year. These are real ranges from our service area, not national averages.
| Repair Type | Typical Cost in Brooklyn | What’s Included |
|---|---|---|
| Gate latch or lock replacement | $185 – $340 | New latch assembly, alignment, hardware |
| Hinge replacement or re-welding | $220 – $450 | Labor, new hinges, post inspection |
| Post straightening or reinforcement | $260 – $520 | Concrete work, post stabilization, realignment |
| Gate sagging or drag correction | $190 – $380 | Hinge adjustment, frame tightening, post check |
| Electric gate sensor or safety eye repair | $250 – $480 | Sensor replacement, wiring, alignment |
| Electric gate motor or circuit board | $425 – $1,100 | Motor rebuild or replacement, board diagnostics |
| Track or roller replacement (sliding gates) | $300 – $620 | Track realignment, roller bearing swap |
| Full gate replacement (standard steel, single swing) | $1,450 – $3,200 | Gate fabrication, hardware, installation, post check |
Two things move these numbers most: the weight of the gate and whether it’s an electric operator. A light aluminum pedestrian gate with a simple latch sits at the bottom of the range. A heavy steel driveway gate with a LiftMaster or FAAC operator sits at the top, because the motor has to be disengaged, tested, and re-calibrated once the gate itself is repaired.
We also see a difference between Brooklyn neighborhoods. Houses in Dyker Heights and Marine Park often have long driveway gates with heavy steel frames, which means more labor per repair. Walk-up gates in Park Slope or Carroll Gardens tend to be smaller but older, so we’re often fixing decades of wear on the post, not just the latch. Either way, the written price we hand you before work begins is the price you pay. No add-ons after the fact, no “while we’re here” upselling.
What Affects Gate Repair Pricing in Brooklyn
- Gate material and weight. Wrought iron and steel gates are heavy. Repairs take longer, require heavier hardware, and sometimes need two technicians. Aluminum and vinyl gates cost less to repair because they’re lighter and easier to handle.
- Electric vs. manual. Electric gates carry a second set of problems: motors, circuit boards, safety sensors, and remote transmitters. A BFT or Viking operator doubles the diagnostic time compared to a manual gate, and that shows up in the labor line.
- Post condition. In Brooklyn, gate posts take a beating from freeze-thaw cycles and the salt air near the waterfront. A rotted or rusted post means we’re replacing the post, not just the gate hardware, and that adds to the bill.
- Foundation and concrete work. If the concrete footing under the post has cracked or settled, the fix requires excavation and new concrete. That’s a structural repair, not a hardware swap, and it’s priced accordingly.
- Access and site conditions. Narrow Brooklyn side yards, gates set into masonry walls, and driveways on steep slopes all make the job slower. We plan for that when we quote, so there are no surprises.
- Parts availability and brand. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule parts are all available to us quickly, but some circuit boards ship faster than others. On the rare occasion a part needs a special order, we’ll tell you before you pay a dime.
We’re factory-trained on every brand we listed above, so we can diagnose on the first visit instead of guessing. That’s where the real savings come from. A technician who knows DoorKing wiring and a technician who’s figuring it out on your dime are two very different prices.
What a Brooklyn Gate Repair Includes
When Latch and Post Gate Repair Brooklyn comes out, you get more than the fix. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. And the way we enter and leave your home matters as much as what we fix.
Here’s the routine on every visit:
- We knock first. The technician introduces himself before he touches anything. He’s background-checked and in uniform, so you know who’s at your door.
- We lay drop cloths and put on shoe covers before we step inside. Your floors stay clean, no matter what the weather outside is doing.
- We explain the price before the work. A written number, in your hand, before any tools come out. If it’s not right for you, there’s no pressure to accept it.
- We do the repair. Quiet tools where possible, pet-safe lubricants where there’s a choice, and a technician who works where he can see the gate, not in your way.
- We take a photo of the clean-up before we leave. You’ll see that the area looks better than we found it. That’s the Cedarwell C.A.R.E. values in practice: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work.
And every repair is covered by the 365-Day Done Right Promise. If the repair doesn’t hold, Latch and Post makes it right, no argument and no fine print. That’s the guarantee on everything we do, from a simple latch swap to a full electric gate motor replacement.
How to Save on Gate Repair
You don’t have to overspend to fix a gate in Brooklyn. Here’s how to keep the price down without cutting corners:
- Fix the latch before the post goes. A sticking latch that gets ignored will eventually force the gate to sag, which puts strain on the hinges, which stresses the post. A $200 latch repair turns into a $500 post job when you wait. Catch it early and the bill stays small.
- Keep the track clean (for sliding gates). Brooklyn street debris, sand, and ice chunks get into gate tracks constantly. A quick hose-down a few times a year keeps the rollers from binding and extends the life of the track.
- Test the safety sensors yourself. Most electric gate failures we see are just dirty or misaligned sensors, which are the cheapest electric repair there is. If the gate won’t close, don’t assume the motor is dead.
- Get the written quote before approving anything. We give every customer a written price before work starts. That’s standard for us. Use that number to compare against anyone else, and make sure they’re quoting the same repair.
- Schedule during the week if you can. There’s no emergency fee on our side for weekday calls. Nights and weekends cost the same for us, but if you have a flexible window, that can help a busy schedule move faster.
If you want a straight answer on price before scheduling, call (934) 649-3673. A live person answers every call, 24 hours a day, 7 days a week. No voicemail, no callback queue. You’ll get a real conversation about your gate and a free estimate.
Electric Gate Repair Costs in Brooklyn
Electric gates are a different animal from manual ones. The gate itself might be fine, but the motor, the circuit board, the safety sensors, or the wiring might be the problem. That’s why the price range is wider and starts higher.
Here’s what we see in Brooklyn for electric gate repair:
- Safety sensor realignment or replacement: $250 – $480. This is the most common electric repair, often caused by wind, yard work, or ice shifting the sensor housing.
- Remote or keypad programming: $120 – $240. Usually quick, but it requires matching the right frequency and security protocol for your brand.
- Motor replacement: $650 – $1,100. The motor is the workhorse. LiftMaster and FAAC motors are rebuildable in many cases, which can save a few hundred dollars over a full replacement.
- Circuit board replacement: $425 – $820. Boards fail from power surges, moisture, and age. We stock or can quickly source boards for every brand we service.
- Wiring repair: $180 – $390. Underground wiring can corrode or get sliced by landscaping. We find the break and repair it without tearing up your whole yard.
A word on safety: electric gates are powerful machines. A motorized gate that closes unexpectedly can hurt a child or a pet. If your gate is reversing erratically or won’t stop on an obstruction, keep kids away from it until it’s fixed. That’s not alarm. That’s just the truth, and it’s part of why we recommend a factory-trained technician for any electric operator repair rather than a general handyman who doesn’t know the brand-specific wiring.
Is It Cheaper to Repair or Replace a Gate?
In Brooklyn, repair is usually the cheaper option. Most gates under 15 years old can be fixed for $200 to $600. Replacement starts around $1,450 for a basic steel gate and climbs from there. Here’s the rule of thumb we give people:
- Repair if the gate frame is solid, the post is straight, and the problem is a latch, hinge, sensor, or motor part.
- Replace if the gate is rusted through, the post is leaning heavily and the concrete base is broken, or the frame itself is bent or cracked.
- Compare by math: if repair costs exceed 50-60% of a new gate installed, replacement starts to make more long-term sense, especially if the old gate is rusting in multiple places.
We’ll give you the honest answer on this. Cody Beckman, who leads our team, would rather tell you a repair is smarter than sell you a gate you don’t need. That’s how the Cedarwell family has been doing this since 2009, and it’s why Brooklyn homeowners keep calling us back.
How Much Does Gate Repair Cost in Brooklyn? (Quick Reference)
For those who want the short version:
- Average gate repair in Brooklyn: $310
- Typical range: $185 to $590
- Most common repair (latch/lock): $185 to $340
- Most expensive common repair (electric motor): $425 to $1,100
- Free estimate: Yes, always. Call (934) 649-3673
FAQs – Gate Repair Cost
How much does a gate repair cost in Brooklyn?
Most gate repairs in Brooklyn cost between $185 and $590, with an average around $310. A simple latch replacement runs $185 to $340, while an electric gate motor repair runs $425 to $1,100. Call (934) 649-3673 for a free written estimate specific to your gate.
Can you fix my gate the same day?
In most cases, yes. We carry common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on our trucks, which means we can often complete a latch, hinge, or sensor repair on the first visit. A live person answers our phone 24/7, so call (934) 649-3673 and we’ll tell you honestly if same-day is possible.
Is it cheaper to repair or replace a gate?
Repair is usually cheaper, with most repairs falling between $200 and $600. Replacement starts around $1,450 for a standard single steel gate. If your gate frame is solid and the post is straight, repair almost always makes financial sense. We’ll give you a straight answer on this during a free estimate.
How much does it cost to fix an electric gate motor?
Electric gate motor repair in Brooklyn typically costs between $425 and $1,100, depending on whether the motor can be rebuilt or needs full replacement. Sensor alignment and wiring repairs are cheaper, usually $180 to $480. For an exact quote, call (934) 649-3673.
Does Latch and Post Gate Repair charge for estimates?
No. Every estimate is free, and every price is provided in writing before any work begins. There’s no pressure to accept and no charge if you decide to wait. A live person answers every call at (934) 649-3673, any time of day or night.
What brands of gate operators do you repair?
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers most electric gates installed in Brooklyn homes. If you have a different brand, call us and we’ll tell you honestly whether we can help.
Why Choose Latch and Post Gate Repair Brooklyn
Every gate has two failure points: the latch that holds it and the post that carries it. That’s the job we focus on, and after more than 15 years of doing it in Brooklyn, we’ve learned what families actually want. They want a straight answer on price. They want clean floors and a technician who asks before he moves anything. They want the gate fixed the first time.
Here’s what you get when you call (934) 649-3673:
- A written price before work starts. Always included, never a surprise.
- Shoe covers and drop cloths on every visit. Plus a photo of the clean-up before we leave.
- Background-checked, uniformed technicians. Trained on the brands families actually own.
- The 365-Day Done Right Promise. If it’s not right, we make it right. No fine print.
- A live person on every call. 24 hours a day, 7 days a week. Nights, weekends, and holidays included.
We’re part of the Cedarwell family of independently owned and operated gate specialists, serving Brooklyn since 2009. Cody Beckman leads our team with the same values the company was built on: explain the price, respect the home, do the job right.
If your gate is sagging, sticking, or refusing to open, call (934) 649-3673 today. You’ll get a free estimate, a straight answer, and a technician who treats your home like his own.
Pricing reflects the Brooklyn market as of 2026. Latch and Post Gate Repair Brooklyn offers free estimates – call (934) 649-3673.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Brooklyn since 2009.
What Our Customers Say
"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Careful and considerate from start to finish. Our kids were playing in the yard and the crew was mindful of them the whole time. Gate opens like new and the area was spotless after."
- Marcus Teague