Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Park Slope
When a wrought-iron garden gate starts grinding against a brownstone stoop on 8th Street or a carriage-house driveway operator quits after a hard rain near Prospect Park West, you need a repair crew that understands Park Slope’s specific building stock. We do. Latch and Post Gate Repair Brooklyn fixes metal gates, wood gates, and electric gate systems throughout Park Slope, and we carry the parts and fabrication know-how to handle original 19th-century ironwork that a generic repair company would walk away from. Call (934) 649-3673 and you’ll reach a live person who can schedule a technician to your block, usually within a day or two depending on the job.
Why Latch and Post Gate Repair Brooklyn Is Park Slope’s Preferred Gate Repair Company
Park Slope homeowners tend to ask the same first question, whether they live on Garfield Place or up by Grand Army Plaza: will the crew leave the house the way they found it? Our answer is the Cedarwell Care Promise, and it’s not an upsell. Every visit includes a written price before any work starts, shoe covers and drop cloths before we step inside, and a photo of the cleanup before the technician leaves. That matters when you have a toddler napping in a parlor-level bedroom or a dog who investigates every new set of boots in the hallway.
Our technicians are background-checked and uniformed, and they’re factory-trained on the equipment Park Slope families actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We fix what’s there, not what’s easiest to sell. Cody Beckman, who leads our Brooklyn crew, reviews every gate repair quote personally before it goes to a customer. We don’t push replacement when a repair makes more sense, and we’ll tell you the truth either way. That’s the kind of straight answer that keeps our Park Slope customers calling us back when the next hinge wears out.
Styles & brands we work with
Metal Gate Repair in Park Slope
Metal Gate Repair in Park Slope covers everything from a rusted hinge on a low garden gate to sag correction on the tall iron railings that frame a brownstone stoop. The work often starts with a close look at where the gate meets the masonry, because that junction is where Park Slope’s housing stock causes the most trouble. Original iron gates on 7th Avenue brownstones were frequently anchored directly into soft brownstone, and after a century of freeze-thaw cycles, the socket can crumble while the gate itself looks fine. We reset the footing, fabricate matching brackets where needed, and repaint with a rust-inhibiting primer before the finish coat goes on.
Most standard metal gate hinge replacements and realignments in Park Slope run between $240 and $520. When custom scrollwork fabrication is involved, which it often is on landmarked blocks, the job can range from $700 to $1,900 depending on the extent of the ornamental detail. You’ll see the exact figure in writing before we touch anything.
Preserving Original Ironwork
Many Park Slope gates are not replaceable from a catalog. They were forged for a specific stoop width in the 1890s or 1910s, and the Landmarks Preservation Commission expects repairs to match the original profile. We’re comfortable with that constraint. Our shop fabricates replacement pickets, hinge straps, and scrollwork patterns that match what’s already on your house, then we finish them to blend with the patina of the surrounding iron.
Hinge and Post Reset on Brownstone Stoops
The soft brownstone under a gate post is the weak point, not the iron itself. We cut out the rusted footing, clean the socket, and re-anchor the post with a new steel footing epoxied into the masonry. This stops the sag at the source rather than just shimming the gate and hoping it holds through next winter’s frost.
Wood Gate Repair in Park Slope
Wood Gate Repair in Park Slope usually means a cedar or mahogany gate at a rear garden entrance, often the one you use every day to take out the trash or bring the stroller through to the yard. These gates live in the same harbor-air conditions as the iron ones, but they fail differently. The moisture swells the wood, the hinges tear out of the frame, and the latch stops catching. We rebuild the hinge points with longer screws into solid material, plane or sand any swollen edges, and re-align the latch so the gate closes without you having to lift it by the handle.
A typical wood gate realignment with new hinges in Park Slope runs $180 to $340. If the frame itself is rotted and needs partial rebuilding, expect $400 to $750. Full replacement with a custom-built cedar gate matching your existing style typically lands between $900 and $1,600, and that includes the hardware and a weather-seal coat. We use pet-safe, low-odor wood treatments when there’s a choice, and we’ll schedule around nap time if quiet matters.
Rotted Hinge Points
The most common wood gate failure in Park Slope is not the gate itself, it’s the hinge screws pulling out of water-damaged wood. We drill out the rotted material, set a solid hardwood plug or a stainless steel reinforcement plate, and remount the hinges. The repair lasts because the load is back on sound wood, not on filler.
Seasonal Realignment
After a wet spring or a dry summer, wood gates in Park Slope shift enough that the latch misses the strike plate. We re-square the gate, shim or trim as needed, and set the latch for reliable closure year-round. It’s a fast job, usually done in one visit, and the price is on the written quote before we start.
Trusted Brands We Service in Park Slope
We stock parts and service the operators Park Slope homeowners actually own: LiftMaster for modern swing gates, FAAC for hydraulic underground systems, BFT for Italian-built linear operators, and Mighty Mule for lighter residential setups. When your gate opener fails, we show up with the right board, capacitor, or limit switch already in the van, which means one visit instead of three. We also keep a stock of replacement hinge pins, latch hardware, and rust-inhibiting primers chosen specifically for the harbor-air conditions around Park Slope.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Park Slope Homes
- Hinge posts pulled out of brownstone stoops. Seasonal expansion and salt air corrode the footing inside the masonry socket, and the gate begins to sag even though the panel looks straight. We reset the post and repair the socket rather than patching the symptom.
- Underground gate operator failure after heavy rain. Converted carriage houses along 6th Avenue and 5th Avenue often have below-grade operator pits, and water intrusion during storms or snowmelt shorts the motor or ruins the control board. We diagnose the electrical fault and can recommend drainage fixes to keep it from recurring.
- Rust at the base hinges of cast-iron stoop railings. This is the classic Park Slope failure point, accelerated by harbor moisture from the Gowanus and Upper Bay and road salt tracked in from Prospect Park West. If caught early, we wire-brush, treat, and repaint; if the metal is too thin, we splice in a new section.
- Latch misalignment on garden gates. The gate shifts with temperature and the latch misses the strike plate. We realign and often replace the lock with a modern rim latch that accepts the same cylinder, so your old key still works.
Pricing for Gate Repair in Park Slope, NY
Park Slope gate repair costs run higher than outer-borough averages for one reason: the housing stock. A hinge replacement on a modern concrete-set gate in Windsor Terrace might run $180, but the same hinge on an original brownstone-mounted gate in Park Slope often requires masonry work and custom fabrication, which pushes the job to $400 to $900. Wrought-iron scrollwork matching on a landmarked block can reach $1,900 or more. A standard wood gate realignment lands between $180 and $340. Every quote is itemized in writing before any work begins, and the 365-Day Done Right Promise backs every repair. If it’s not right, we make it right. Call (934) 649-3673 for a free estimate, and we’ll give you a real number, not a range that doubles when the invoice arrives.
We Also Serve Cities Near Park Slope
Our Gate Repair crews work across Park Slope and into the surrounding neighborhoods, including Brooklyn, New York, Financial District, and Canarsie. If you’re near the park on the Slope side or just over the bridge in Manhattan, call (934) 649-3673 and we’ll let you know exactly when we can be there.
Serving Park Slope, NY - Our Local Coverage Area
We’re based in the Park Slope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Park Slope
If your gate is original to a landmarked row house and you’re repairing it in kind, matching the existing profile, materials, and finish, an LPC permit is generally not required for routine maintenance and repair. Replacement with new ironwork or a design change is different and would require LPC review. Many Park Slope brownstones are in the Park Slope Historic District, so we recommend checking with the LPC or your block association before any work that alters the gate’s appearance. We’re experienced with LPC expectations and can help you document the repair scope before you file anything.
The panel is not the problem; the hinge post footing inside your brownstone stoop has likely rusted or come loose. Freeze-thaw cycles and salt air from the harbor corrode the steel where it sits in the masonry socket, and the gate slowly drops until it scrapes the stoop. We fix this by cutting out the old footing, fabricating a new bracket if needed, and re-anchoring the post into the masonry. Call (934) 649-3673 and we’ll diagnose it on site.
Yes. Our shop fabricates replacement scrollwork, pickets, and hinge straps to match the original forging on your gate, including the specific curl patterns and bar thicknesses common to late-19th-century Brooklyn ironwork. We then finish the new piece to match the patina of the surrounding iron, so the repair disappears into the gate. This is the single most common reason Park Slope homeowners call us rather than a general handyman.
Harbor air and road salt from streets like Prospect Park West will eventually eat through any paint job, so the best protection is a two-part approach: a rust-inhibiting primer applied directly to clean metal, followed by two finish coats of a marine-grade enamel. We use primers formulated for coastal conditions and check the base hinges every visit, because that’s where Park Slope gates always fail first. A maintenance coat every three to five years is cheaper than splicing rusted sections later.
Yes, especially in converted carriage houses where the operator sits in a below-grade pit. Heavy rain or snowmelt floods the pit, shorts the motor or control board, and the gate stops responding. We diagnose the electrical fault, replace the failed component, and can recommend drainage or sealing work to keep water out of the pit going forward. Call (934) 649-3673 for an exact quote, our estimates are free.
If your Park Slope gate is sagging, stuck, or refusing to open, call (934) 649-3673. We’ll give you a straight answer on what’s wrong, what it costs, and when we can be there. Written price first, shoe covers and drop cloths always, and a cleanup photo before we leave. That’s the Cedarwell Care Promise, and it’s how we’ve done gate repair in Park Slope since our first brownstone hinge reset.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Park Slope’s brownstone blocks and carriage houses as part of the Cedarwell family since 2009.