Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Brooklyn, NY
Automatic gate repair in Brooklyn typically costs between $250 and $650 for most common fixes, and many jobs are completed the same day. We focus on the brands families in Park Slope, Bay Ridge, Williamsburg, and Bensonhurst actually have: LiftMaster, Mighty Mule, FAAC, and BFT. If your gate is grinding, refusing to open, or beeping without reason, call Latch and Post Gate Repair Brooklyn at (934) 649-3673 and a live person will answer.
Automatic gates fail in predictable ways. A control board stops reading the remote. A sensor gets knocked out of alignment by a delivery truck. The motor still runs but the chain has stretched past the point of tensioning. This is focused work, and it’s the kind of work we do every day as part of our broader Gate Repair in Brooklyn service. We don’t do general contracting or handyman work. We fix gates.
When You Need Automatic Gate Repair
Most automatic gate problems announce themselves early, before the gate stops moving entirely. Here are the situations Brooklyn homeowners tell us about most often:
- The gate opens halfway and reverses. This usually means the safety sensor eyes are misaligned or the track has debris in it. In brownstone neighborhoods, winter road salt accelerates track corrosion and makes this worse.
- The remote works, but the keypad doesn’t. Keypads on Brooklyn exterior gates take direct weather exposure. Rain, snow, and the humidity off the East River are hard on the circuit contacts. Sometimes it’s a simple reprogram; sometimes the keypad housing needs replacement.
- The motor hums but the gate doesn’t move. This is often a worn drive belt or a chain that’s slipped off its sprocket. Continuing to press the remote while the motor strains will burn out the motor, which turns a $200 repair into a $700 replacement.
- The gate slams shut instead of closing gently. The hydraulic or mechanical closer is failing. This is a safety issue, especially if you have kids who run ahead of you in the driveway.
- After a storm, the gate behaves erratically. Lightning strikes and power surges in Brooklyn routinely damage control boards. We see this most often in the August thunderstorm season and during coastal winter storms.
If any of these sound familiar, the fix is usually contained. The longer a problem runs, the more expensive it gets. Call (934) 649-3673 and we’ll talk through what you’re seeing.
Our Automatic Gate Repair Process
Every gate comes down to two parts: the latch that holds it and the post that carries it. The automation on top of that is the brain and the muscle. Here’s how we approach a repair call at Latch and Post Gate Repair Brooklyn:
- We answer the phone and listen. A live person picks up 24/7. You describe the symptom, we ask a few questions about the brand and the age of the system, and we schedule a visit. No voicemail, no callback queue.
- We diagnose on site before touching anything. We test the remote, the keypad, the sensors, and the motor. We find the actual failed component rather than replacing parts until something works. For LiftMaster and Mighty Mule systems, we carry common boards and sensors in the truck, which means most repairs happen on the first visit.
- We give you a written price before any work starts. You’ll see the exact number before we pick up a tool. No surprises, no pressure. If the repair doesn’t make economic sense compared to replacing the operator, we’ll tell you that straight and give you the numbers for both paths.
- We protect your home while we work. Our technicians are background-checked and uniformed, trained under the Cedarwell C.A.R.E. values: Clean up like it’s our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work. We put on shoe covers and lay drop cloths before stepping inside. If there’s a gate-mounted keypad near a flower bed, we work around the plants. When we leave, we show you a photo of the clean-up.
- We test the complete cycle with you watching. Open, close, safety reverse, remote, keypad. We don’t call it done until you’ve seen it work correctly. If your kids are asleep, we test on the quietest settings and keep the doorbell off.
- We explain what was fixed and what to watch for. You get a plain-English summary of the repair, not a jargon dump. If there’s natural wear in a hinge or a roller, we tell you now so it doesn’t surprise you later.
Every repair is covered by the 365-Day Done Right Promise. If the fix isn’t right, we make it right. No argument, no fine print. That’s the deal.
Automatic Gate Repair Pricing in Brooklyn
Brooklyn pricing runs a little higher than national averages because our technicians deal with tight access, limited parking, and older gate hardware that’s been through decades of Northeast winters. Here’s How Much Does Gate Repair Cost in Brooklyn, NY? (2026 Price Guide) based on what we typically see across the borough:
| Repair Type | Typical Brooklyn Range |
|---|---|
| Remote or keypad reprogramming | $95 – $150 |
| Safety sensor realignment or replacement | $180 – $320 |
| Control board replacement (LiftMaster, FAAC, BFT) | $350 – $650 |
| Chain or belt replacement | $250 – $450 |
| Motor replacement | $500 – $900 |
| Full operator replacement (labor included) | $1,200 – $2,400 |
A few honest notes on what drives cost. First, the brand. A Mighty Mule operator is straightforward; a FAAC or BFT hydraulic system is more involved and parts cost more. Second, access. A gate at the end of a 40-foot Brooklyn driveway with a car parked on the sidewalk means more walking and more rolling, and that time is part of the quote. Third, age. A 15-year-old LiftMaster may have corroded wiring at the junction box that only becomes visible once we open it up.
You’ll get a written price before any work starts. If the number changes because we find something hidden, we stop, call you, and get your approval before continuing. That’s the Cedarwell Care Promise, and it’s not an upsell. It’s just how we work. Call (934) 649-3673 for a free estimate. We’ll give you a straight number, not a range from a national call center.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Brooklyn?
Most automatic gate repairs in Brooklyn run between $250 and $650, with simple reprogramming at the lower end and control board or motor work at the higher end. You’ll get a written price before any work begins. Call (934) 649-3673 for an exact quote; estimates are free.
Can you fix my automatic gate the same day?
Yes, in most cases. Our technicians carry common LiftMaster, Mighty Mule, FAAC, and BFT parts in the truck, so many repairs are completed on the first visit. Call (934) 649-3673 in the morning and we’ll tell you on the phone whether same-day is possible for your location.
Is it cheaper to repair or replace my automatic gate operator?
If the operator is under eight years old and the failure is a single component like a sensor or control board, Gate Realignment or repair is almost always cheaper. If the motor has failed and the system is over twelve years old, replacement often makes better long-term sense. We’ll show you both numbers in writing and let you decide without pressure.
Do you work on automatic gates attached to the house or only driveway gates?
We work on both. In Brooklyn, many homes use automatic operators on driveway gates, garage gates, and sometimes pedestrian gates between the street and the yard. We service them all with the same walkthrough, the same written quote, and the same clean-up routine, including shoe covers and drop cloths when we go inside.
Will the repair leave a mess in my yard or driveway?
No. We lay drop cloths on the floor and put on shoe covers before we step inside, and we protect the ground around the gate while we work. Before we leave, we take a photo of the clean-up so you can see it for yourself. That’s included in every visit, not an extra charge.
Key Takeaways
- Automatic gate repair in Brooklyn typically runs $250 – $650, and we give you a written price before any work starts.
- We fix LiftMaster, Mighty Mule, FAAC, and BFT systems, with many parts stocked in our service trucks for same-day repairs.
- Every visit includes shoe covers, drop cloths, a clean-up photo, and background-checked technicians trained on the Cedarwell C.A.R.E. values.
- All work is covered by the 365-Day Done Right Promise: if it’s not right, we make it right.
- A live person answers every call, 24/7. That means nights, weekends, and holidays.
Call Latch and Post Gate Repair Brooklyn
If your gate is acting up, you’re one call from a straight answer. We’ll talk through the symptom, give you a realistic sense of cost, and schedule a visit at a time that works in your house’s rhythm. Nap time, school pickup, weekend morning, late evening. We respect it all. Call (934) 649-3673 now. A live person will answer, and you’ll get a free estimate with no obligation and no push.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Brooklyn.