Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Park Slope, NY
Gate repair in Park Slope means working on ironwork that’s often older than the subway system. Most of the low garden gates and tall stoop railings in this neighborhood were forged between the 1880s and 1910s, and many of them sit under Landmarks Preservation Commission oversight. That means a sagging hinge or a rusted latch isn’t a swap-it-out job here, it’s a match-the-profile job. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we work on Park Slope gates every week. Call us at (934) 649-3673 and a live person answers, day or night.
Why Park Slope Homes Are Different
Park Slope’s housing stock is dominated by four- and five-story brownstone and limestone row houses from the late 19th century, with some pre-war elevator buildings mixed in. On these blocks, the front areaway is typically enclosed by a low cast- or wrought-iron gate, and the stoop railing is part of the facade itself, not an add-on. The gates were often anchored directly into brownstone, which is soft stone. When the iron expands and contracts through freeze-thaw cycles, the masonry socket around the base hinge can crack. Then the gate leans, the latch stops lining up, and the rust at the base accelerates.
We see this pattern on blocks from 5th Avenue up through 8th Avenue, and on the side streets between them. Salt air from the Gowanus and Upper Bay adds another layer: painted railings corrode faster here than they do ten blocks inland. The fix usually involves custom fabrication to match the existing 19th-century scrollwork, plus a careful resetting of the masonry socket so the soft brownstone doesn’t crack further. That’s not a generic gate repair, and we don’t treat it like one.
Permits are a real consideration, too. If the property is in a designated historic district, the Landmarks Preservation Commission may require that any replacement ironwork match the original profile and finish. We can advise on what typically triggers LPC review and what falls under routine repair, so you’re not surprised mid-project.
Styles & brands we work with
Our Main Park Slope Services
Most Park Slope homeowners call us for one of three things: a gate that won’t close or latch properly, a full replacement where the existing ironwork is beyond saving, or electric opener work on a driveway or garage gate. Each has its own page with specific pricing and detail.
Gate Repair in Park Slope
This is the most common call we get in Park Slope: a gate that sags, drags, or won’t stay latched. On brownstone blocks, the cause is usually the masonry socket at the base hinge, which has cracked or shifted over decades of freeze-thaw cycles. We reset the socket, align the gate, and repair or replace the latch hardware to match the original profile. If the scrollwork has rusted through, we fabricate matching sections rather than patching with modern bar stock that would look wrong. Full details are on the Gate Repair in Park Slope page.
Gate Installation in Park Slope
A new gate in Park Slope has to look like it’s been there since the building went up. We measure carefully, account for the slope of the stoop and the existing anchor points, and specify ironwork that matches the block’s character, whether that’s simple vertical pickets or more ornate scrollwork on a landmarked block. We also check whether LPC review may apply before you commit to a design. See the Gate Installation in Park Slope page for the full process and pricing.
Electric Gate Repair in Park Slope
Electric gates show up in Park Slope mostly on the pre-war elevator buildings and a handful of private driveway gates. The usual culprits are worn limit switches, failing control boards, and sensor eyes knocked out of alignment by curb traffic. We’re factory-trained on LiftMaster, FAAC, BFT, and Mighty Mule openers, which covers most of what’s installed in this neighborhood. The Electric Gate Repair in Park Slope page covers troubleshooting, common repairs, and what we stock locally.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Park Slope
We’re factory-trained on the brands Park Slope families actually have: LiftMaster, FAAC, BFT, and Mighty Mule. We stock common parts for these lines locally, which means many repairs are done in a single visit rather than waiting on a shipped part. Browse our brands for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Park Slope, NY
| Service | Typical range in Park Slope |
|---|---|
| Gate latch replacement | $65 – $95 |
| Hinge replacement (single gate) | $85 – $125 |
| Adjustment and alignment | $55 – $85 |
| Weld repair (minor, on-site) | $95 – $145 |
| Rust removal and repaint (single iron gate) | $120 – $210 |
| Custom scrollwork fabrication | $380 – $620 |
| Masonry socket reset (stoop base hinge) | $120 – $190 |
| Full garden gate installation | $490 – $780 |
| Electric opener control board replacement | $210 – $340 |
| Sensor eye replacement or realignment | $65 – $110 |
In Park Slope, custom fabrication and LPC-related matching are the two things that most often push a job toward the higher end of these ranges. Historic-profile ironwork costs more because it isn’t off-the-shelf. Either way, you get a written price before any work starts, every time, with no pressure to accept it.
Neighborhoods We Serve in Park Slope
We work across the whole of Park Slope, from the numbered streets by the park up to the quieter blocks near 4th Avenue and beyond. Our scheduling is coordinated from the brand’s New York City office, and our crews are in the neighborhood regularly. Most repairs can be scheduled within a few days; urgent gate failures are handled on a faster timeline.
- North Slope
- Center Slope
- South Slope
- Park Slope Historic District
- 4th Avenue corridor
Service Area – Cities Near Park Slope
Latch & Post serves Park Slope and the surrounding Brooklyn neighborhoods. If you’re a few blocks outside the neighborhood, we likely cover your block too. See our pages for Brooklyn, NY, New York, NY, Financial District, NY, and Canarsie, NY for service details in those areas.
Serving Park Slope, NY - Our Local Coverage Area
We’re based in the Park Slope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Park Slope
We answer calls live around the clock, and we treat a gate that won’t close or latch as an urgent issue because it leaves your home unsecured. Most Park Slope repairs can be scheduled within a few days, and genuinely urgent failures are prioritized. Call (934) 649-3673 and we’ll tell you straight what the soonest slot looks like.
Routine repairs like latch replacement, hinge work, and repainting typically don’t require LPC review. Full gate replacement on a landmarked brownstone may, especially if the design deviates from the original profile or finish. We can walk you through what usually triggers review before any work begins. Call (934) 649-3673 for a straight answer on your specific block.
Yes. We ask before we move or touch anything, and we can schedule your visit for a window that works for your family. If kids are sleeping, we use quiet tools and keep the work contained. Just let the person on the phone know what you need when you call (934) 649-3673.
Call Latch & Post Gate Repair at (934) 649-3673 for a free estimate on any gate work in Park Slope. A live person answers, 24 hours a day, 7 days a week.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Park Slope Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs