Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Brooklyn, NY
A driveway gate is the gate that swings or slides across your car entrance, and in Brooklyn it lives a hard life: salt spray in January, direct sun on brownstone courtyards in July, and years of open-close cycles that slowly wear out hinges, posts, and opener motors. Most driveway gate work in this borough falls into three buckets: the gate won’t open or close, the gate sags and drags on the pavement, or the post has loosened in its footing and the whole assembly leans. Latch and Post Gate Repair Brooklyn handles all three, and we do it with a written price in your hand before any work starts. Call (934) 649-3673 and a live person answers, any hour. If you’re still deciding whether to repair or install new, our Gate Installation in Brooklyn page walks through what full replacements involve.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. We’re part of the Cedarwell family and have been at it since 2009, which means we’ve seen just about every way a Brooklyn driveway gate can fail.
Key Takeaways
- Driveway gate repair in Brooklyn typically costs $220 – $780 depending on the issue; full gate installations run higher and we quote them in writing first.
- We service LiftMaster, FAAC, BFT, and Mighty Mule openers, plus the gate hardware they operate.
- Every visit includes shoe covers, drop cloths, a written price, and a cleanup photo before we leave.
- All work is covered by the 365-Day Done Right Promise.
- One phone call reaches a live person, 24/7: (934) 649-3673.
When You Need Driveway Gate
Some gate problems announce themselves and some creep in slowly. If any of these sound familiar, it’s time to have a professional look before a small fix turns into a bigger one.
- The gate drags on the driveway or screeches when it moves. In neighborhoods like Mill Basin or Marine Park, a sagging gate often means a worn hinge or a post that’s begun to lean outward from freeze-thaw cycles. Left alone, the gate scores the concrete and stresses the opener.
- The gate won’t open or only opens halfway. A LiftMaster or FAAC opener that groans and stops mid-travel usually points to a failing drive mechanism or a sensor knocked out of alignment. We diagnose the cause on site, then explain the fix before you approve it.
- The post wobbles when you push the gate. A loose post is the most common driveway gate failure we see in Brooklyn. The fix usually means re-setting the post in fresh concrete or installing a heavier base plate, depending on what the footing looks like.
- The latch doesn’t catch or the gate swings free. In backyards off the Gowanus or along Flatbush Avenue, a gate that won’t stay closed is a real problem for pets and kids. Latch replacement is quick work when we can match the hardware.
- The opener motor runs but the gate doesn’t move. That’s often a stripped gear in a Mighty Mule or BFT opener. We carry replacement parts for the brands families actually own, so the right fix usually happens on the first visit.
- You’re planning a new driveway and want a gate that fits the width. Before concrete is poured, we can advise on post spacing, swing room, and opener choice, so the gate bolts in clean instead of being adapted to a bad layout later.
Our Driveway Gate Process
We keep this simple. You describe the symptom, we schedule a visit, and one of our uniformed technicians walks the gate with you before anything comes apart. Here’s the order of operations:
- You call and a human picks up. No menus, no callback queue. We listen to what the gate is doing, ask a few questions about the opener brand and the post, and book a window that works for your household.
- We arrive and look before we touch. The technician introduces himself, puts on shoe covers before stepping inside, and walks the gate with you. He checks hinge play, post stability, opener travel, and the sensor positions. If the job involves an electric opener, he’ll ask before opening the control box – ask before we move or touch anything is one of the C.A.R.E. values we work by.
- You get a written price. Before any part is ordered or any tool lifts a hinge, you see the number on paper. It includes the part, the labor, and any disposal of the old hardware. No verbal estimate games. What’s on the sheet is what the job costs.
- We do the work with the house in mind. Drop cloths go down wherever materials or tools sit. We use pet-safe lubricants where there’s a choice, and if you’ve got a sleeping toddler, we can schedule the noisier cutting work for after nap time. Quiet tools when kids are asleep isn’t a promise we make lightly; it’s how we run every visit.
- You see the cleanup before we go. When the gate is adjusted, the opener is reprogrammed, and the post is solid, the technician takes a photo of the cleaned work area and shows it to you. No masking tape left on the floor, no metal shavings in the driveway.
- The work is covered for a full year. If anything about the repair or installation isn’t right, we make it right under the 365-Day Done Right Promise. You don’t argue. You just call.
Driveway Gate Pricing in Brooklyn
Driveway gate work in Brooklyn prices out by the job type, not by the hour. Here’s How Much Does Gate Installation Cost? (2026 Price Guide) - Brooklyn, NY typically breaks down:
- Latch replacement (gate won’t stay closed): $180 – $340, depending on hardware style and whether the strike plate needs re-drilling.
- Hinge replacement (gate sags or scrapes): $220 – $480 per pair. Heavier gates require weld-on or bearing hinges, which cost more than standard strap hinges.
- Post re-setting (gate wobbles or leans): $350 – $780, including removing the old post, setting the new one in concrete, and re-hanging the gate. In areas like Sheepshead Bay where soil holds water, we sometimes pour a deeper footing to prevent repeat settling.
- Opener repair (motor runs, gate doesn’t move, or remote won’t respond): $280 – $650, depending on brand. LiftMaster and FAAC drive gears are common stock for us; Mighty Mule and BFT boards occasionally need ordering.
- Full driveway gate installation: $2,400 – $8,500 for a typical single-leaf or slide gate with opener, posts, and hardware. The spread depends on gate material, opener brand, and whether we’re working with fresh concrete or retrofitting an existing drive.
What moves the number on any driveway gate job is the weight of the gate, the condition of the post footings, and the opener brand. A lightweight aluminum gate on a solid post is a fast, clean fix. A steel gate on a rotted wood post is more involved. Either way, you’ll see the exact number in writing before we touch anything, and estimates are free. Call (934) 649-3673 to get one on the schedule.
Why Brooklyn Homeowners Call Us for Driveway Gates
Brooklyn lots are tight. A driveway gate often sits three feet from a neighbor’s fence, which means a botched post pour or a misaligned opener affects someone else’s property. We also install Pedestrian Gate systems when a separate walk-through entry makes more sense for the layout. We’ve re-set enough posts in Carroll Gardens and Bay Ridge to know how to dig a clean footing without disturbing the surrounding stone or the neighbor’s shrubs.
We also know the brands families actually have on their property. We’re factory-trained on LiftMaster, FAAC, BFT, and Mighty Mule, among others. When a LiftMaster opener loses its limit settings after a power blink, or a FAAC sensor gets knocked loose by a delivery truck, we don’t guess. We fix it.
Cody Beckman, our owner, started Latch and Post Gate Repair Brooklyn with one rule: treat every driveway gate as if it guarded his own home. That means written pricing, clean floors inside the house when we pass through, and a technician who explains the fix in plain English before he starts.
FAQs – Driveway Gate
How much does it cost to fix a driveway gate in Brooklyn?
Driveway gate repairs in Brooklyn generally run $220 to $780, depending on whether we’re replacing a latch, re-hanging hinges, re-setting a post, or repairing an opener. The most common job, a sagging gate with worn hinges, typically lands around $300 – $480. You’ll get a written price before we start. Call (934) 649-3673 for a free estimate over the phone and a firm quote on site.
Can you repair my driveway gate the same day I call?
In many cases, yes. Latch replacements, hinge swaps, and opener sensor realignments are usually same-day jobs once we’re on site, and a live person answers our phone 24/7 to schedule the visit. Post re-sets and full Gate Installation services typically need a separate day because concrete must cure. If it’s urgent, tell the person who answers and we’ll do our best to get a technician out quickly.
How long does a driveway gate installation take in Brooklyn?
A standard single-leaf driveway gate with opener takes one day for the gate hanging and opener wiring, plus a second day for the post concrete to cure before the gate is full operational. Sliding gates or custom-width gates may take an additional visit for track setting. We’ll give you the timeline in writing with the quote, so you can plan around it.
Do you service LiftMaster and Mighty Mule driveway gate openers?
We do. Our technicians are factory-trained on LiftMaster, Mighty Mule, FAAC, and BFT openers, and we stock common replacement parts for these brands. If the board or drive gear is beyond an on-site fix, we’ll install the right replacement and leave the gate working before we go.
Is it cheaper to repair or replace a driveway gate?
If the gate itself is rusted through, badly bent, or the post is split, replacement often costs less than repeated repairs. A re-hang with new hinges and a re-set post can extend a sound gate’s life for years at under $800, while a full replacement starts around $2,400. We’ll tell you honestly which one makes sense for your gate, and we’ll quote both if you’re comparing.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving Brooklyn.