Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Brooklyn?
Gate installation in Brooklyn typically runs between $1,400 and $6,500, with most residential driveway gates falling in the $2,200 to $4,300 range. A basic single-swing steel gate starts around $1,400 installed, while a custom aluminum double gate with an electric opener runs $4,000 to $6,500 or more. Your final number depends on material, gate width, whether you need a new post or footing, and whether automation is part of the job.
That is the straight answer. Below, we break down exactly where those dollars go, what drives Brooklyn prices higher than other boroughs, and how to avoid paying for work you do not need. If you want a written quote for your specific gate and post setup, call (934) 649-3673 and a live person will answer.
Key Takeaways
- Most Brooklyn residential gate installations cost $2,200 to $4,300 including labor and basic materials.
- Electric gate openers add $800 to $2,400 depending on the brand and whether arms, wiring, and safety sensors are included.
- Brooklyn’s concrete and brick walkways mean footing work is common, adding $200 to $600 per post.
- Aluminum gates cost more than steel upfront but resist Brooklyn’s salty winter air better.
- Latch & Post gives you a written price before any work begins, every visit, with no pressure to accept.
Gate Installation Cost Breakdown (2026)
These numbers reflect what we see across Brooklyn neighborhoods, from Bay Ridge up through Williamsburg and out to Flatbush and Canarsie. They are real ranges from recent local projects, not national averages.
| Item | Typical Brooklyn Price Range |
|---|---|
| Single swing gate, steel, 4 ft wide | $1,400 – $2,200 installed |
| Double swing gate, steel, 10 – 12 ft wide | $2,800 – $4,600 installed |
| Aluminum driveway gate, single | $2,000 – $3,800 installed |
| Aluminum driveway gate, double | $3,300 – $6,200 installed |
| Wood gate, cedar or pressure-treated | $1,200 – $2,900 installed |
| New steel or concrete post and footing | $200 – $600 per post |
| Electric gate opener (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule) | $800 – $2,400 added to gate price |
| Removal and haul-away of old gate | $80 – $250 |
| Concrete walkway or apron repair after post work | $150 – $500 per section |
Several things push you toward the high or low end of these ranges. A gate that hangs on existing posts in good condition stays near the bottom. A gate that needs new footings dug through Brooklyn’s dense soil and concrete, or a double gate with an opener and intercom, lands at the top. Lead time on custom gates, especially aluminum ones ordered to size, can add two to four weeks but rarely changes the installed price.
What we want you to notice is that the labor and the post work often equal or exceed the cost of the gate itself. That is the part of the quote that catches people off guard. We lay it all out in writing before anything starts, so there is no surprise line item on the back end.
What Affects Gate Installation Pricing in Brooklyn
- Gate material and finish. Steel is the most economical and holds up well, but powder-coated aluminum stands up to Brooklyn’s salty winter road spray better and will not rust the way bare steel can. Expect to pay 30 to 60 percent more for aluminum.
- Gate width and weight. A single 4-foot pedestrian gate is straightforward. A 12-foot double driveway gate needs stronger posts, heavier hinges, and often a sturdier opener. Each extra foot of width adds $150 to $400.
- The condition of your existing posts. If your brick or concrete posts are cracked or leaning, the right fix is replacement, not shims. Digging new footings in Brooklyn’s tight side yards and concrete-heavy lots costs more than it does in wide suburban yards.
- Whether the gate is automated. Electric openers are the single biggest add-on. Beyond the opener itself, you need conduit, wiring, safety sensors, and sometimes a keypad or intercom. Underground wire runs through concrete are slower and pricier than a straight wall mount.
- Access to the work area. Many Brooklyn homes have narrow side passages or gates at the rear of a brownstone with no direct street access. Carrying materials by hand or protecting stairwells and garden beds adds time, and time is money.
- Permits and landmarks. Some Brooklyn historic districts in areas like Park Slope and Brooklyn Heights require landmark approval for front-facing gates. That process can add weeks and modest filing costs. A reputable installer flags this early rather than after you have paid a deposit.
How to Save on Gate Installation
The biggest savings in our experience come from fixing what is broken rather than replacing what is not. If your posts are solid and level, keep them. If the gate itself is straight but the hinges sag, we can often re-hang it for a few hundred dollars instead of $2,000. That is not a sales tactic, it is a fact we tell Brooklyn homeowners every week. Our job is to give you the price for what you actually need, in writing, before you commit to anything.
Beyond that:
- Choose steel over aluminum if budget is the priority and the gate is not directly exposed to road salt.
- Skip automation now if you are used to opening the gate by hand. You can add an opener later, and we will set the posts and hinges to accept one.
- Time the work. Late fall and early winter are slower months for gate installers. You may get faster scheduling and sometimes better material pricing.
- Get the quote in writing and compare apples to apples. We have seen quotes that look lower but exclude footing work, cleanup, or haul-away. A written itemized price protects you.
Call (934) 649-3673 and we will walk through your setup, give you a realistic range over the phone, and schedule a visit with a written price before any work starts. The estimate is free.
What We Mean When We Say “Installed”
Every gate comes down to two parts, the latch that holds it and the post that carries it. That is the job we focus on at Latch & Post, because a beautiful gate on a weak post is a problem waiting to happen. When we quote an installation in Brooklyn, the price includes the gate, hinges, latch or lock, the post work needed to carry the weight, and the cleanup.
Our technicians are background-checked and uniformed, and they follow the Cedarwell C.A.R.E. values on every visit. That means we ask before we move or touch anything, we respect your time and quiet hours, and we explain the price before the work. Inside the house or near the door, we lay drop cloths on the floor and put on shoe covers before we step in, so your floors stay clean. When the job is done, you get a photo of the cleanup before the technician leaves. If you have a baby napping or a dog who loses his mind at the sound of a drill, tell us, and we will schedule around it or run tools quietly when that matters.
Every installation we do is covered by the 365-Day Done Right Promise. If something is not right, we make it right. No argument, no fine print. That applies to the gate, the opener, the post, and the way we left your property.
Electric Gate Openers: What They Add in Brooklyn
Electric gate openers are the most common add-on we install in Brooklyn. The opener itself, depending on brand, runs about $400 to $1,300 for the unit. Labor, wiring, sensors, and programming bring the total add-on to $800 to $2,400.
We are factory-trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when we install an opener on a Brooklyn gate, we know the exact swing speed, force settings, and battery backup options for that model. If there’s a choice of lubricant or sensor position, we take the option that works best for your gate’s weight and your driveway’s slope.
Safety note: Electric gate openers run on household current and use high-tension moving parts. Installation and adjustment should always be handled by a trained professional, especially on heavy driveway gates. A gate that is mis-calibrated can injure a child or a pet. We set every opener to manufacturer spec and test the auto-reverse and obstruction sensors before we leave.
If you want a keypad, intercom, or vehicle sensor added to the system, budget an additional $150 to $700 per feature. We quote those line items separately, in writing, so you always know what each part costs.
Can You Install a Gate Yourself in Brooklyn?
You can, but we would not recommend it for anything larger than a lightweight garden gate. A driveway gate that carries 300 pounds on two hinges over a sloped Brooklyn walkway is not a weekend project. Getting the post plumb and the footing deep enough for freeze-thaw cycles in our clay-heavy soil is the difference between a gate that swings clean for 15 years and one that scrapes the walkway by spring.
The dangerous part is the spring and tension hardware on heavier gates. We have seen homeowners try to save money by re-hanging a heavy gate themselves and end up with a crushed finger or a bent post. If the gate is light and the post is solid, a careful DIY install can work. If it is heavy enough to need a lift, call a pro. We do not say that to scare you; we say it because we have fixed enough DIY jobs to know how they usually end.
Gate Installation for Brownstone Front Yards
Brownstone gates in neighborhoods like Park Slope, Fort Greene, and Bed-Stuy come with their own set of rules. The front gate is usually installed under the stoop or across the garden entrance, and it has to match the building’s historic character. Landmarks approval can be required in designated historic districts, and that process typically takes four to eight weeks.
On these jobs, we work with the homeowner to spec a gate that suits the period of the house. Simple steel pickets, a proper latch height, and a finish that holds up to Brooklyn weather. We handle the measuring, the fabrication order, and the install. What you need to handle is the paperwork, and we will tell you if your block requires it before you spend a dollar with us.
Average Gate Installation Timeline in Brooklyn
Here is what a typical project looks like from first call to final swing test:
- Phone call and rough quote. You call (934) 649-3673, talk to a live person, and get a realistic price range based on your gate size and material. Same day, every time.
- On-site visit and written quote. We measure the opening, check the posts, and hand you an itemized written price. The quote is free and there is no pressure to accept.
- Gate order or fabrication. Stock steel gates can often install within a week. Custom aluminum or historic-district gates take two to five weeks.
- Installation day. Most residential gates go in within four to eight hours. That includes post work, hanging, latch adjustment, and cleanup.
- Final walkthrough. We test the swing, the latch, and the opener if you added one. We show you the cleanup photo and hand you the warranty paperwork.
FAQs – Gate Installation Cost
How much does a gate cost to install in Brooklyn in 2026?
Most Brooklyn residential gate installations run $1,400 to $6,500, with a typical single gate at $2,200 to $3,300 installed. Custom aluminum and automated double gates run higher. We give you a written itemized price before any work begins, so you never guess.
Is it cheaper to repair or replace a gate?
Repair is usually cheaper when the gate itself is straight and the issue is hinges, latch, or a leaning post. Typical Brooklyn gate repairs run $180 to $650, compared to $1,400 to $4,300 for a full installation. We will tell you honestly which makes sense for your gate and post. Call (934) 649-3673 for an exact quote, free.
How much does an electric gate opener cost to install in Brooklyn?
Expect to pay $800 to $2,400 total for an electric opener installed, including the unit, wiring, sensors, and programming. The unit itself is $400 to $1,300 depending on brand: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule. Call (934) 649-3673 and we will quote your exact model and labor.
How much does a driveway gate cost in Brooklyn?
A single driveway gate in Brooklyn runs $2,000 to $3,800 installed, and a double driveway gate runs $3,300 to $6,200. The range depends on width, material, and whether the posts need new footings. For a written quote on your driveway, call (934) 649-3673, any time.
How much does it cost to gate a front yard or brownstone entrance?
Gating a brownstone front yard or garden entrance in Brooklyn typically costs $1,500 to $4,000, including the gate, posts, and installation. If you are in a historic district like Park Slope or Brooklyn Heights, add four to eight weeks for landmark approval. Call (934) 649-3673 and we will tell you if your block needs that.
Get a Written Brooklyn Gate Installation Quote
We have been installing and repairing gates in Brooklyn since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. That means we are local, we answer our own phone, and we are still here if something needs attention next year.
When you call Latch & Post, a live person answers, day or night. We will talk through your gate, your posts, and your budget, and we will give you a realistic price range before anyone steps foot on your property. Then we come out, measure, and hand you a written price. If you accept, the job is done by background-checked technicians who wear shoe covers, lay drop cloths, clean up after themselves, and show you a photo of the cleanup before they leave.
Call (934) 649-3673 for a free estimate on gate installation in Brooklyn. For more on our process and the neighborhoods we serve, visit Gate Installation in Brooklyn or head back home to browse our services.
Pricing reflects the Brooklyn market as of 2026. Latch and Post Gate Repair Brooklyn offers free estimates – call (934) 649-3673.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Brooklyn, serving the borough since 2009.
What Our Customers Say
"Electric gate was sticking. He oiled and adjusted the track, wiped everything down after, and left no grease anywhere. Quiet, kind, and quick."
- Carlene Fuchs"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco